SPFMPR302 Datasheet | Avago Technologies

Description The 4-pin MOST Optical Receiver (MPR3 02) is a highly integrated CMOS IC bined with a high speed PIN - diode designed to receive up to 25Mbit/s optical data which is bi-phase coded at up to 50Mbaud and convert this optical data to a TTL patible data stream. This high performance, low cost, CMOS receiver consists of a low noise transimpedance amplifier and parator in the data path. A timer circuit puts the part into a low power mode if optical data is not received for 10µs (typ.). During the low power mode, the PIN diode is still being observed and if activity is detected, Bigfoot will resume full power operation within 3.5ms (typ.). A STATUS-pin indicates if modulated light is received (Light on -> STATUS = low). With the STATUS-pin the power supply of the whole MOST device can be switched ON. Features Excellent solution for converting high speed data from Plastic Optical Fiber (POF) to digital output. - High speed receiver up to 50 MBaud (25Mbit/s net data rate) - TTL Data Output (Light to Logic Function) - Network activity sensing during Zero Power Mode (ICC<10µA) - BUS Activity Status Output - Good 650nm sensitivity for working in a low attenuation range of PMMA Fiber - Low cost Applications - Optical Receiver for MOST Systems MPR3 02 Actual design status IC Revision package type J CAI Optical Sensitivity device marking -24.5 d Bm MPR3 02 Maximum Ratings Parameter Symbol Min Max Storage Temperature Range Junction Temperature Soldering Temperature (>2.5 mm from case bottom t≤5s) TSTG TJ TS -40 100 -40 100 - 235 Power Dissipation PTOT Power Supply Voltage VCCMax DC Current To Any Pin Except Power II/OMax - 300 -0.5 6.0 - ±10 Unit °C °C °C m W V m A Remended Operating Conditions Parameter Supply Voltage Operating Temperature Range Symbol VCC TA Min Max Unit 4.75 5.25 V -40 85 °C All the data in this specification refers to the operating conditions above unless otherwise...