SDN8080G Overview
The SDN8080G is a MON/SEGMEMT driver for large-panel dot-matrix STN LCD module. It can be used either as a MON driver or as a SEGMENT driver, by connecting its CS input to VDD or VSS. When its CS input is connected to VDD, the SDN8080G is an 80-MON driver.
SDN8080G Key Features
- Operating voltage range (VDD-VSS, control logic): 2.7 ~ 5.5 volts
- LCD bias voltage range (VDD-VEE): 6 ~ 28 volts
- 80-SEGMENT driver or 80-MON driver, via CS-pin selection
- When used as a SEGMENT driver, 4-bit parallel or 1-bit serial interface with a controller
- When used as a MON driver, two modes of operation are available: Single mode or Dual mode
- Display duty cycle: 1/64 ~ 1/256
- LCD on/off control, when used as SEGMENT driver
- External 4-level LCD bias voltage
- Operating frequency range: 8 MHz, when VDD= 5 volts
- Operating temperature range: -30 to +85 °C
