DST-2000C
Key Features
- Provides two SPDT relay outputs, one energizes on CW rotation, the other on CCW rotation.
- Provides two 10 mA drive current outputs to illuminate customer-provided LED indicators, one for CW rotation, the other for CCW rotation.
- Provides two pulsed outputs, one for CW rotation, the other for CCW rotation, that can serve as an input signal to Dynalco tachometer DS-800.
- Provides a 0-1 mA output proportional to speed that can serve as input signal to Dynalco tachometer models G-101 or DPM-105.
- Provides an amplified square wave output signal equal to the input frequency to serve as input signal for Dynalco models SPD-100, SPD-700, LST-100, and DS-800.
- Provides a regulated 8 Vdc (25 mA) auxiliary output to power Dynalco digital panel meter DPM-105.
- 2 Functional Description The DST-2000C receives two input signals from the Dynalco M343 dual output magnetic pickup. The circuits within the DST-2000C evaluate the two input signals and activate the appropriate relay (CW or CCW) to indicate direction of rotation. The DST-2000C outputs a proportional 0-1 mA analog signal as well as a buffered square wave (8 V peak-to-peak) equal to the input frequency. The DST-2000C also outputs a 10 mA signal to drive external LEDs which indicate the direction of rotation (CW and CCW). There are also two pulse outputs, one for CW, the other for CCW. There is one pulse per discontinuity. Pulses are 0 to +8 Vdc, 35 mic
