Datasheet4U Logo Datasheet4U.com

AP2401 - DUAL LDO REGULATORS

Datasheet Summary

Description

The AP2401 series are dual positive voltage regulator ICs fabricated by CMOS process.

Each of these ICs consists of a voltage reference, two error amplifiers, two resistor networks for setting output voltages.

Each channel has a current limit circuit for current protection.

Features

  • Maximum Output Current/Channel: More Than 150mA (300mA Limit) High Output Voltage Accuracy: ±2% Low Quiescent Current/Channel: 25µA Typical Low Standby Current: 0.1µA Typical High PSRR: 70dB Typical （f=1kHz) Extremely Low Noise: 30µVrms (10Hz to 100kHz) Operating Temperature: -40 to 85oC Compatible with Low ESR Ceramic Capacitor.

📥 Download Datasheet

Datasheet preview – AP2401

Datasheet Details

Part number AP2401
Manufacturer BCD Semiconductor
File Size 870.72 KB
Description DUAL LDO REGULATORS
Datasheet download datasheet AP2401 Datasheet
Additional preview pages of the AP2401 datasheet.

📁 Similar Datasheet

  • AP2401 - 2.0A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH (Diodes)
  • AP2401A - 2.0A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH (Diodes)
  • AP2402 - MOS (Shiwei)
  • AP2403 - MOS (Shiwei)
  • AP2406 - 600mA Synchronous Step-Down Converter (Chipown)
  • AP2406ES-ADJ - 600mA Synchronous Step-Down Converter (Chipown)
  • AP2406ES5-1.2 - 600mA Synchronous Step-Down Converter (Chipown)
  • AP2406ES5-1.5 - 600mA Synchronous Step-Down Converter (Chipown)
  • AP2406ES5-1.8 - 600mA Synchronous Step-Down Converter (Chipown)
  • AP240N03NF - 30V N-Channel Enhancement Mode MOSFET (APM)
Other Datasheets by BCD Semiconductor
  • AP2402 - DUAL 300mA LDO REGULATORS
  • AP2122 - EXTREMELY LOW NOISE LDO REGULATOR
  • AP2201 - RF ULDO REGULATOR
  • AP2202 - RF ULDO REGULATOR
  • AP2203 - RF ULDO REGULATOR
  • AP2204 - WIDE INPUT VOLTAGE RANGE 150mA ULDO REGULATOR
  • AP2210 - RF ULDO REGULATOR
  • AP2213 - LOW NOISE LDO REGULATOR

Full PDF Text Transcription

Click to expand full text
Data Sheet DUAL LDO REGULATORS General Description The AP2401 series are dual positive voltage regulator ICs fabricated by CMOS process. Each of these ICs consists of a voltage reference, two error amplifiers, two resistor networks for setting output voltages. Each channel has a current limit circuit for current protection. The AP2401 series feature high ripple rejection, low dropout voltage, low noise, high output voltage accuracy, and low current consumption which make them ideal for use in various battery-powered devices. The chip enable function allows the output of each channel to be turned on/off independently, greatly reducing the power consumption. The AP2401 series have 1.8V/2.5V, 1.8V/2.8V, 1.8V/ 3.3V and 2.8V/1.8V versions. The AP2401 are available in standard SOT-23-6 package.
Published: |