Datasheet4U Logo Datasheet4U.com

AP3032 - WHITE LED STEP-UP CONVERTER

General Description

The AP3032 is an inductor-based DC/DC boost converter designed to drive up to 4 rows of LEDs with 7 series for each in parallel for backlight.

A constant frequency 1MHz PWM control scheme is employed in this IC, which means tiny external components can be used.

Key Features

  • Efficiency Up to 81%（VIN=5V, IOUT=80mA）.
  • Drives up to 4 Rows of WLEDs with 7 Series for Each in Parallel (VIN=5V).
  • Fast 1 MHz Switching Frequency.
  • Wide Input Voltage Range: 2.7V to 9V.
  • Low Feedback Voltage: 200mV.
  • Output Over Voltage Protection.
  • Cycle-by-cycle Current Limit: 1.4A.
  • Built in Soft-start.
  • Built in Standby-mode to Achieve High.
  • Frequency PWM Dimming.
  • Built in Thermal Shutdown Function.

📥 Download Datasheet

Datasheet Details

Part number AP3032
Manufacturer BCD Semiconductor
File Size 333.02 KB
Description WHITE LED STEP-UP CONVERTER
Datasheet download datasheet AP3032 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AP3031 WHITE LED STEP-UP CONVERTER DIODES
AP3036B WHITE LED STEP-UP CONVERTER Diodes
AP3000 1/4 INCH DIAPHRAGM VALVE APTech
AP3000A-00 SILICON PIN DIODE CHIP ASI
AP3000C-11 SILICON PIN DIODE ASI

Other Datasheets by BCD Semiconductor

Part Number Description
AP3030 WHITE LED STEP-UP CONVERTER
AP3031 WHITE LED STEP-UP CONVERTER
AP3031A WHITE LED STEP-UP CONVERTER
AP3033 WHITE LED STEP-UP CONVERTER
AP3036 WHITE LED STEP-UP CONVERTER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Data Sheet WHITE LED STEP-UP CONVERTER AP3032 General Description The AP3032 is an inductor-based DC/DC boost converter designed to drive up to 4 rows of LEDs with 7 series for each in parallel for backlight. A constant frequency 1MHz PWM control scheme is employed in this IC, which means tiny external components can be used. Specifically, 1mm tall 6.8μH inductor and 1µF aluminum output capacitor for the typical application is sufficient. The over output voltage protection is equipped in AP3032, which protects the IC under open load condition. The AP3032 includes UVLO, soft-start, stand-by mode, current limiting and OTSD to protect the circuit under over load condition The AP3032 is available in SOT-23-6 package.