Datasheet4U Logo Datasheet4U.com

AP4310 - DUAL OP AMP AND VOLTAGE REFERENCE

General Description

The AP4310 is a monolithic IC specifically designed to regulate the output current and voltage levels of switching battery chargers and power supplies.

The device contains two Op Amps and a 2.5V precision shunt voltage reference.

Key Features

  • increased precision with a corresponding reduction in system complexity and cost. The AP4310 is available in standard packages of DIP8 and SOIC-8. AP4310 Features Op Amp.
  • Input Offset Voltage: 0.5mV.
  • Supply Current: 75µA per Op Amp at 5.0V Supply Voltage.
  • Unity Gain Bandwidth: 1MHz.
  • Output Voltage Swing: 0 to (VCC -1.5) V.
  • Power Supply Range: 3 to 36V Voltage Reference.
  • Fixed Output Voltage Reference: 2.5V.
  • Voltage Tolerance: ± 0.4%, ± 1%.
  • Sink Current.

📥 Download Datasheet

Datasheet Details

Part number AP4310
Manufacturer BCD Semiconductor
File Size 169.84 KB
Description DUAL OP AMP AND VOLTAGE REFERENCE
Datasheet download datasheet AP4310 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AP4310A DUAL OP AMP AND VOLTAGE REFERENCE Diodes
AP4310E DUAL OP AMP AND VOLTAGE REFERENCE Diodes
AP431 ADJUSTABLE PRECISION SHUNT REGULATOR Diodes Incorporated
AP431 Adjustable Precision Shunt Regulator Anachip
AP4312 CONSTANT VOLTAGE AND CONSTANT CURRENT CONTROLLER Diodes Incorporated

Other Datasheets by BCD Semiconductor

Part Number Description
AP4313 CONSTANT VOLTAGE AND CONSTANT CURRENT CONTROLLER
AP4300 QUAD OP AMP AND VOLTAGE REFERENCE
AP4301 QUAD OP AMP AND VOLTAGE REFERENCE
AP4302 QUAD OP AMP AND VOLTAGE REFERENCE
AP4303 QUAD OP AMP AND VOLTAGE REFERENCE

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Data Sheet DUAL OP AMP AND VOLTAGE REFERENCE General Description The AP4310 is a monolithic IC specifically designed to regulate the output current and voltage levels of switching battery chargers and power supplies. The device contains two Op Amps and a 2.5V precision shunt voltage reference. Op Amp 1 is designed for voltage control with its non-inverting input internally connects to the output of the shunt regulator. Op Amp 2 is for current control with both inputs uncommitted. The IC offers the power converter designer a control solution that features increased precision with a corresponding reduction in system complexity and cost. The AP4310 is available in standard packages of DIP8 and SOIC-8. AP4310 Features Op Amp · Input Offset Voltage: 0.