Datasheet4U Logo Datasheet4U.com

AZ4052 - Dual 4-channel Analog Multiplexer/Demultiplexer

General Description

The AZ4052 is high-speed si-gate CMOS device.

The AZ4052 is dual 4-channel analog multiplexers or demultiplexers with common select logic.

Each multiplexer has four independent inputs/outputs (pins nY0 to nY3) and a common input/output (pin nZ).

Key Features

  • Wide Operation Voltage: ±5.0V or 10V.
  • Low On-resistance: - 55Ω (Typ. ) at VCC-VEE=5V - 40Ω ( Typ. ) at VCC-VEE=10V.
  • Ultra Low THD+N: 0.003% @ 10V, 0.008% @ 5.0V.
  • Ultra Low Crosstalk: -120dB.
  • Ultra Low Noise: 6.0μVRMS.
  • Operating Temperature: -40ºC to 85ºC.

📥 Download Datasheet

Datasheet Details

Part number AZ4052
Manufacturer BCD Semiconductor
File Size 467.74 KB
Description Dual 4-channel Analog Multiplexer/Demultiplexer
Datasheet download datasheet AZ4052 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AZ4012-01F TVS Diode Leiditech
AZ4 Full Wave Rectifying Valve Philips
AZ4 Rectifying Valve ETC
AZ41 Diode Biplaque MAZDA BELVU
AZ41 Full Wave Rectifying Valve Philips

Other Datasheets by BCD Semiconductor

Part Number Description
AZ431 ADJUSTABLE PRECISION SHUNT REGULATORS
AZ4558C DUAL BIPOLAR OPERATIONAL AMPLIFIERS
AZ4559 DUAL BIPOLAR OPERATIONAL AMPLIFIERS
AZ494A PULSE-WIDTH-MODULATION CONTROLLER
AZ494B PULSE-WIDTH-MODULATION CONTROLLER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Preliminary Datasheet Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052 General Description The AZ4052 is high-speed si-gate CMOS device. The AZ4052 is dual 4-channel analog multiplexers or demultiplexers with common select logic. Each multiplexer has four independent inputs/outputs (pins nY0 to nY3) and a common input/output (pin nZ). The common channel select logics include two digital select inputs (pins S0 and S1) and an active LOW ___ ___ enable input (pin E). When pin E=LOW, one of the four switches is selected (Low-impedance On-state) ___ with pins S0 and S1. When pin E =HIGH, all switches are in the high-impedance Off-state, independent of pins S0 and S1. VCC and GND are the supply voltage pins for the digital control inputs (pins ___ S0, S1 and E).