AP3105NV Datasheet PDF - BCD High Voltage Green Mode PWM Controller Specs

AP3105NV - High Voltage Green Mode PWM Controller

This page provides the datasheet information for the AP3105NV, a member of the AP3105NA High Voltage Green Mode PWM Controller family.

Datasheet Summary

Description

2.1 CTRL Pin For some applications, the system requires external programmable protection function.

The CTRL pin has two kinds of modes to trigger the protection: high level trigger and low level trigger.

The low threshold voltage is 0.5V and high threshold voltage is 2.5V.

Features

which include cycle-by-cycle current limit (OCP), fast OCP (FOCP), VCC over voltage protection, OTP, OLP protection. The “CTRL” pin is designed for customers to add external protection functions such as OVP and OTP. The AP3105NX is specially designed for off-line AC-DC power supply, such as LCD monitors, notebook adapters and battery charger.

Datasheet Details

Part number	AP3105NV
Manufacturer	BCD
File Size	383.42 KB
Description	High Voltage Green Mode PWM Controller
Datasheet	AP3105NV Datasheet
Additional preview pages of the AP3105NV datasheet.

📁 Similar Datasheet

AP3105NV - COST EFFECTIVE GREEN PWM CONTROLLER (Diodes)

AP3105NA - COST EFFECTIVE GREEN PWM CONTROLLER (Diodes)

AP3105NL - COST EFFECTIVE GREEN PWM CONTROLLER (Diodes)

AP3105NR - COST EFFECTIVE GREEN PWM CONTROLLER (Diodes)

AP3105 - COST EFFECTIVE GREEN PWM CONTROLLER (Diodes)

AP3105L - COST EFFECTIVE GREEN PWM CONTROLLER (Diodes)

AP3105R - COST EFFECTIVE GREEN PWM CONTROLLER (Diodes)

AP3105V - COST EFFECTIVE GREEN PWM CONTROLLER (Diodes)

AP3101 - GREEN MODE PWM CONTROLLER (BCD Semiconductor)

AP3103A - COST EFFECTIVE GREEN PWM CONTROLLER (Diodes)

Full PDF Text Transcription

Click to expand full text

Application Note 1096 High Voltage Green Mode PWM Controller AP3105NA/NV/NL/NR Prepared by Wu Qikun System Engineering Dept. 1. Introduction The AP3105NX is a low start-up current, current mode PWM controller with green-mode power-saving operation. Different from AP3103, AP3105NX’s PWM switching frequency at normal operation is fixed at 65kHz dithering with a narrow range. The difference between AP3103 and AP3105NX is shown in Table 1. The dithering of frequency will improve EMI feature. When the load decreases, the frequency will reduce and when at a very low load, the IC will enter the “burst mode” to minimize switching loss. A minimum 20kHz frequency switching is to avoid the audible noise as well as to reduce the standby loss.

Published: Aug 4, 2014 |