• Part: AP3700E
  • Description: LOW POWER PWM CONTROLLER
  • Manufacturer: BCD
  • Size: 198.52 KB
Download AP3700E Datasheet PDF
BCD
AP3700E
AP3700E is LOW POWER PWM CONTROLLER manufactured by BCD.
Data Sheet LOW POWER PWM CONTROLLER FOR OFF-LINE BATTERY CHARGER General Description Features The AP3700E is a green-mode pulse width modulation (PWM) controller. It is specially designed for low power applications such as off-line battery chargers, where the needs for low standby power, space saving and low cost are all required. In a battery charger rated 5V/0.8A, the maximum standby power is only 0.18Watt. In normal operation, the AP3700E switches on and off at a fixed switching frequency of 60 k Hz. With a current limit capability of 460m A, the AP3700E can directly drive the emitter of high voltage NPN transistor. When output power falls below a given level, the IC enters skip cycle mode to reduce power consumption. The AP3700E also Features under-voltage lockout, over-current and short circuit protections. - Current Mode Control with Skip Cycle Capability - Lower Operating Current: 0.45m A - Fixed Switching Frequency: 60 k Hz - Frequency Dithering for Low EMI: ±2.5k Hz - Under-Voltage Lockout Protection - Over-Current Protection - Internal Short Circuit Protection - Higher Output Voltage at OUT Terminal - Low Total Cost Solution Applications - Battery Chargers - Off-Line Power Supplies The AP3700E is available in TO-92 package. May 2008 Rev. 1. 1 TO-92 (Buck Packing) TO-92 (Ammo Packing) Figure 1. Package Types of AP3700E BCD Semiconductor Manufacturing Limited 1 Data Sheet LOW POWER PWM CONTROLLER FOR OFF-LINE BATTERY CHARGER Pin Configuration Z Package (TO-92) 3 OUT 2 GND 1...