Datasheet4U Logo Datasheet4U.com

MPD-425C - 250W DC-DC Power-Supply

Key Features

  • Input Voltage: 19~32VDC.
  • Input Current: Max. 8A at 24VDC.
  • Inrush Current: Does not exceed 10A at 24VDC input, cold start at 25oC.
  • Ripple and Noise: < +/-1% peak to peak ripple and noise for each output.
  • Line Regulation: < +/-1% at rated load with +/-10% change in input voltage.
  • Load Regulation: +/-4% for +5V, +/-5% for +12V, +/-3% for -12V and -5V.
  • Power Good Signal: Goes high 100~500ms after all DC output are ready.
  • Power Failure: Goes low 0.5ms before any DC ou.

📥 Download Datasheet

Datasheet Details

Part number MPD-425C
Manufacturer BOSER Technology
File Size 75.25 KB
Description 250W DC-DC Power-Supply
Datasheet download datasheet MPD-425C Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MPD-425V 250W DC-DC POWER SUPPLY INPUT RANGE: 40 ~ 57VDC ETC
MPD100 (MPD100 - MPD400) STABISTORS Also / Tight Tolerance Microsemi Corporation
MPD100 TIGHT TOLERANCE STABISTORS Digitron Semiconductors
MPD100A TIGHT TOLERANCE STABISTORS Digitron Semiconductors
MPD200 (MPD100 - MPD400) STABISTORS Also / Tight Tolerance Microsemi Corporation

Other Datasheets by BOSER Technology

Part Number Description
MPD-810H 120W 10~30VDC DC-DC ATX Open Frame Power-Supply
MPD-830R 300W DC-DC ATX Power Supply

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MPD-425C Industrial Power Supply 250W DC-DC Power Supply Input Range: 19~32VDC 2.0 11.0 TO SWITCH 0.42 0.35 0.4 DC OUTPUT WIRES 14.4 DC-DC 0.5 13.8 4-TAPPING #6-32 6.4 2.7 1.6 0.5 11.5 Features *Input Voltage: 19~32VDC *Input Current: Max. 8A at 24VDC *Inrush Current: Does not exceed 10A at 24VDC input, cold start at 25oC *Ripple and Noise: < +/-1% peak to peak ripple and noise for each output *Line Regulation: < +/-1% at rated load with +/-10% change in input voltage *Load Regulation: +/-4% for +5V, +/-5% for +12V, +/-3% for -12V and -5V *Power Good Signal: Goes high 100~500ms after all DC output are ready *Power Failure: Goes low 0.