BP2356D Datasheet | BPS

Non-isolated Buck APFC LED Driver Description The BP2356D is a high precision non-isolated buck driver with active PFC, specially designed for high mains input offline constant current LED lighting. The driver with on-chip PFC circuit achieves high power factor and low THD. Operating in critical conduction mode, the power MOSFET switching loss is reduced and the inductor is fully utilized. The BP2356D integrates a 500V power MOSFET. With few external ponents, the LED output current can be precisely controlled. The BP2356D utilizes patented floating ground structure. The inductor current is sensed during the whole switching cycle. So it achieves high precision output current control, and excellent line regulation and load regulation. The BP2356D utilizes patented start up technology with HV JFET. So it achieves fast start up, reduce count of external ponents, and realize smaller form factor. The BP2356D offers rich protection functions to improve the system reliability, including, LED short circuit protection, VCC under voltage protection, CS resistor open circuit protection and cycle by cycle current limit. All the protection functions are autorecovery. The system reliability is further improved by the thermal regulation function. The output current is reduced when the driver is over temperature. Features - Fast start up and power supply with HV JFET - Integrated with 500V Power MOSFET - Active PFC for High Power Factor and Low THD - ±3.5% LED Output Current Accuracy - Excellent Line and Load Regulation - Critical Conduction Mode Operation - Ultra Low (300u A) Operating Current - LED Short Protection - Current Sensing Resistor Open Protection - Cycle by Cycle Current Limit - VCC Under Voltage Protection - Auto Fault Recovery - Thermal Regulation Function Applications - LED retrofit lamps, Bulb, Spot Light, GU10/E27 - LED PAR30, PAR38 Lamp - LED tube, LED String - Other LED Lighting BP2356D_EN _DS_Rev.1.2 .bpsemi. Bright Power...