BES516-325-G-E5-Y-S4 Datasheet | Balluff

BES 516-325-G-E5-Y-S4 Ordering code: Inductive sensor M12x50 mm DC, direct current PNP/Normally open (NO) Sn = 4 mm Flush (shielded) - - Characteristic data Assured operating distance Sa Eff. switching distance Sr Tolerance Sr Hysteresis H max. (in % of Sr) Repeat accur. R max. (% of Sr) Ambient temperature Temp. drift max. (% of Sr) Switching freq. f max. Ready delay tv max. Utilisation category Function indicator Power-on indicator Short-circuit protected Protected against polarity reversal Protected against reverse connection Degree of protection as per IEC 60529 Principle of operation 3,2 4 mm ±10 % 15 % 5% -25...70 °C 10% 600 Hz 10 ms DC 13 Yes No Yes Yes Yes IP67 Inductive No-load current Io undamped Off-state current Ir max. Minimum operating current Im Rated short circuit current Output resistance Ra Load capacitance max. (at Ue) 12 m A 80 µA 0 m A 100 A 2.0k + D + LED 1 µF Mechanical data Connection type Connector type Housing material Surface protection Sensing surface material Mounting length Shock rating Vibration rating Degree of contamination Tightening torque max. Connector M12x1-S04 Cu Zn Nickel-plated PA 12 30 mm Shock, half-sinus, 30 gn, 11ms 55 Hz, 1 mm ampl., 3x30 min 3 15 Nm Basic data Electrical data Operating voltage Ripple max. (% of Ue) Rated operating voltage Ue DC Voltage drop static max. Rated insulation voltage Ui Effective operating current Ie No-load current Io damped 10...30 V DC 15 24 3,5 V 75 DC 130 m A 25 m A Basic standard IEC 60947-5-2 Remarks The sensor is functional again after the overload has been eliminated. Embeddable: See installation notes for inductive sensors with extended switching distance 825357. With connector, e.g. BKS-S 20-… total length = switch length +18 mm. Definitions see main catalog subject to change Internet Balluff Germany Balluff USA Balluff China : .balluff. : +49 (0) 7158 173-0, 173-370 : 1-800-543-8390 : +86 (0) 21-50 644131 1 (2) Print date: 12.04.2013 Selection date: 12.04.2013 Free...