Pt100 Datasheet | Baumer

Description A platinum resistor is built into the temperature sensor. Changes in temperature are reflected by changes in the electrical resistance, so that measuring the value of the resistance gives an analogue expression for the actual temperature. The Pt100 element has a resistance of 100 Ohms at 0°C and a welldocumented working curve (DIN/EN/IEC 60751) within the nominal working range. The sensors are used in a wide range of applications within the marine, industrial, energy and food sectors. The Pt100 sensor fits as an insert in sensor tubes with an internal diameter of 6 mm such as the bi Temp temperature measuring system. Air sensors are used without sensor pockets to ensure fast response time. .baumerprocess. Design and specifications subject to change without notice Data Sheet 2902-1 Page 1 Technical Data Standard sensor Measuring range Ambient temperature Marking label Pressure range Humidity Protection class Cable type Wires Length Air sensor Measuring range Ambient temperature Marking label Environment Air gap Humidity Protection class Cable type Wires Length -50...205°C -50...205°C -30...105°C < 25 bar (water flow 3m/sec.) < 98% RH, condensing IP 65 High-flexible silicone, grey 4 (2 x Red, 2 x white) up to 99.99 metres -50...205°C -50...205°C -30...105°C Non-aggressive air 8 holes, ø3 mm < 98% RH, condensing IP 65 High-flexible silicone, grey 4 (2 x Red, 2 x white) up to 99.99 metres mon data for both types Case material Acid-proof, stainless steel AISI 316 Ti (W 1.4571) Case dimensions ø5.8 mm x 60 mm Time constant τ0,5 Accuracy See table DIN/EN/IEC 60751 1/1 DIN B +(0.3 + 0.005 x t) °C 1/3 DIN B +1/3 x (0.3 + 0.005 x t) °C 1/6 DIN B +1/6 x (0.3 + 0.005 x t) °C Vibrations Lloyds Register, test 2 Mechanical tolerances ISO 2768-m Disposal of product and packing According to national laws or by returning to Baumer Time Constant τ 0.5 If a pocket or sensor tube is used, the response time is extended, i.e. the time duration for the sensor...