9L26044 Datasheet | Belden CDT Electronics

Description Belden’s (9L260XX series) .050″ pitch extruded gray ribbon cable was designed for general purpose electronic interconnect applications where higher current carrying capacities are required. The design also conforms to the electrical performance specifications outlined by the SCSI-3 parallel interface document. As with the 9L280XX series, the cable provides reliable mass-termination to standard .100″ contact IDC connectors, flexibility, consistent electricals and breakouts can be made easily with the tear feature design. In addition, the overall cable thickness is only .038″ ± .002″ allowing mateability with all standard IDC connectors. The cable is constructed of stranded 26 AWG (7x34) tinned copper conductors. Insulation material consists of Gray PVC, with a Blue polarity stripe for proper circuit alignment. Various conductor counts are standard; other sizes are available upon request. The cable is UL approved and CSA certified, and passes the VW-1 Vertical Wire Flame Test. Color Code: Gray with Blue polarity stripe (standard), Gray with Black polarity stripe (MIL-C-49055/1). Application: Internal interconnection or internal wiring of electronic equipment. Physical Specifications Conductor Insulation Pitch Temperature Rating Flammability Rating UL Approval CSA Approval Packaging Electrical Specifications Voltage Rating Current Rating Conductor Resistance Insulation Resistance Impedance- Capacitance- (@ 1 MHz) Inductance- (@ 1 MHz) Propagation Delay- - Test Configuration: G-S-G (ground-signal-ground). Part No. Standard [UL & CSA] MIL-C-49055/1 [QPL] (Designation) No. of Cond. Dimensions Width “A” Inch mm Span “B” Inch .45 ±.008 .65 ±.008 .75 ±.008 .95 ±.008 mm 11.43 ±.20 16.51 ±.20 19.05 ±.20 24.13 ±.20 30.48 ±.20 31.75 ±.20 41.91 ±.20 49.53 ±.30 54.61 ±.30 85.09 ±.30 9L26010 9L26014†† 9L26016- - 9L26020†† 9L26025- - 9L26026†† 9L26034- - 9L26040† 9L26044- - 9L26068 - - YP-3305 10 (M49055/1-17) YP-3306 14 (M49055/1-18) YP-3308 16 (M49055/1-20) YP-3309 20...