Datasheet4U Logo Datasheet4U.com

ASSR-1420 - Solid State Relay

Download the ASSR-1420 datasheet PDF. This datasheet also covers the ASSR-1410 variant, as both devices belong to the same solid state relay family and are provided as variant models within a single manufacturer datasheet.

General Description

The Broadcom® ASSR-14XX Series consists of an AlGaAs infrared light-emitting diode (LED) input stage optically coupled to a high-voltage output detector circuit.

The detector consists of a high-speed photovoltaic diode array and driver circuitry to switch on/off two discrete high-voltage MOSFETs.

Key Features

  • Compact solid-state bidirectional signal switch.
  • Single and dual channel normally-off Single-Pole- Single-Throw (SPST) relay.
  • 60V output withstand voltage.
  • 0.6A or 1.2A current rating (See schematic for ASSR- 1411 connections A and B. ).
  • Low input current: CMOS compatibility.
  • Low on-resistance:.
  • 0.2Ω typical for DC-only.
  • 0.7Ω typical for AC/DC.
  • High speed switching:.
  • 0.1 ms (TON), 0.02 ms (TOFF) typical.
  • High transient immunity:.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (ASSR-1410-Broadcom.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
ASSR-1420 Solid State Relay AVAGO
ASSR-1410 Solid State Relay AVAGO
ASSR-1411 Solid State Relay AVAGO
ASSR-1218 Solid State Relay AVAGO
ASSR-1219 Solid State Relay AVAGO

Other Datasheets by Broadcom

Part Number Description
ASSR-1410 Solid State Relay
ASSR-1411 Solid State Relay
ASSR-1218 Solid State Relay
ASSR-1219 Solid State Relay
ASSR-1228 Solid State Relay

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ASSR-1410, ASSR-1411 and ASSR-1420 General-Purpose, Form A, Solid State Relay (Photo MOSFET) (60V/0.6A/1Ω) Data Sheet Description The Broadcom® ASSR-14XX Series consists of an AlGaAs infrared light-emitting diode (LED) input stage optically coupled to a high-voltage output detector circuit. The detector consists of a high-speed photovoltaic diode array and driver circuitry to switch on/off two discrete high-voltage MOSFETs. The relay turns on (contact closes) with a minimum input current of 3 mA through the input LED. The relay turns off (contact opens) with an input voltage of 0.8V or less. The single-channel configurations, ASSR-1410 and ASSR1411, are equivalent to 1 Form A Electromechanical Relays (EMR), and the dual-channel configuration, ASSR-1420, is equivalent to 2 Form A EMR.