Datasheet4U Logo Datasheet4U.com

HCPL-2502 - High-Speed Optocouplers

General Description

These diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output.

Key Features

  • High speed: 1 Mb/s.
  • TTL compatible.
  • Available in 8-pin DIP, SO-8, widebody packages.
  • Open collector output.
  • Safety approval UL Recognized.
  • 3750 Vrms for 1 minute (5000 Vrms for 1 minute for HCNW and Option 020 devices) per UL1577 CSA Approved IEC/EN/DIN EN 60747-5-5 Approved.
  • VIORM = 567V peak for SO-8 devices.
  • VIORM = 630V peak for DIP 300 mil devices.
  • VIORM = 1414V peak for DIP 400 mil (widebody) devices.
  • Dual channel version a.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HCPL-2502 High Speed Transistor Optocouplers General Instrument Optoelectronics
HCPL-2502 (HCPL-xxxx) Single Channel / High Speed Optocouplers Hewlett-Packard
HCPL-2502 High Speed Optocouplers AVAGO
HCPL-2503 HIGH SPEED TRANSISTOR OPTOCOUPLERS QT Optoelectronics
HCPL-2503 High Speed Logic Interface Optocoupler Avago

Other Datasheets by Broadcom

Part Number Description
HCPL-257K Transistor Output Optocouplers
HCPL-2601 High Speed TTL Compatible Optocouplers
HCPL-2611 High Speed TTL Compatible Optocouplers
HCPL-2630 High Speed TTL Compatible Optocouplers
HCPL-2631 High Speed TTL Compatible Optocouplers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
6N135/6, HCNW135/6, HCPL-2502/0500/ 0501 Single-Channel, High-Speed Optocouplers Data Sheet Description These diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance. These single channel optocoup-lers are available in 8-pin DIP, SO-8, and Widebody package configurations. The 6N135, HCPL-0500, and HCNW135 are for use in TTL/CMOS, TTL/LSTTL or wide-bandwidth analog applications. Current transfer ratio (CTR) for these devices is 7% minimum at IF = 16 mA.