OPA2889 Datasheet | Burr-Brown

FEATURES - FLEXIBLE SUPPLY RANGE: +2.6V to +12V Single Supply ±1.3V to ±6V Dual Supplies UNITY-GAIN STABLE WIDEBAND ±5V OPERATION: 60MHz (G = +2V/V) OUTPUT VOLTAGE SWING: ±4V HIGH SLEW RATE: 250V/μs LOW QUIESCENT CURRENT: 460μA/ch LOW DISABLE CURRENT: 18μA/ch DESCRIPTION The OPA2889 represents a major step forward in unity-gain stable, voltage-feedback op amps. A new internal architecture provides slew rate and full-power bandwidth previously found only in wideband, current-feedback op amps. These capabilities give exceptional full-power bandwidth. Using a dual ±5V supply, the OPA2889 can deliver a ±4V output swing with over 40m A drive current and 60MHz bandwidth. This bination of features makes the OPA2889 an ideal RGB line driver or single-supply analog-to-digital converter (ADC) input driver or low power twisted pair line receiver. The low 460μA/ch supply current of the OPA2889 is precisely trimmed at +25°C. System power may be reduced further using the optional disable control pin. Leaving this disable pin open, or holding it HIGH, operates the OPA2889 normally. If pulled LOW, the OPA2889 supply current drops to less than 20μA/ch while the output goes into a high-impedance state. RELATED OPERATIONAL AMPLIFIER PRODUCTS - - - - - - - - - - - - - APPLICATIONS VIDEO LINE DRIVING x DSL LINE RECEIVERS HIGH-SPEED IMAGING CHANNELS ADC BUFFERS PORTABLE INSTRUMENTS TRANSIMPEDANCE AMPLIFIERS ACTIVE FILTERS 1k W Vi 0V ® 4V 500p F 200W 1/2 OPA2889 50W +6V 16W +5V ADS8472 SINGLES Low-Power Voltage-Feedback with Disable 16-Bit 1MSPS SAR ADC DUALS OPA2890 OPA2690 OPA2691 TRIPLES OPA890 OPA690 OPA691 OPA692 -6V 200W 750W .01m F 750W Voltage-Feedback Amplifier with Disable (1800V/μs) Current-Feedback Amplifier with Disable (2100V/μs) Fixed Gain OPA3690 OPA3691 OPA3692 +6V 375W VREF/2 -6V 500k Hz LP Pole 1/2 OPA2889 16W Low Power, DC-Coupled, Single-to-Differential Driver for ≤100k Hz Inputs Please be aware that an important notice concerning availability, standard...