CM6533N Datasheet | C-Media

DESCRIPTION The CM6533/CM6533N/CM6533X1 is a USB 2.0 audio chip built-in 8051 for flexible applications. With integrated Tri-Colors PWM LED driver and two (2)-channel ADC/DAC and S/PDIF interface that makes it suitable for headset, docking, speaker and microphone applications. The internal 8051 can also be developed to a lot of different applications, such as Microsoft™ Lync / Skype/Vo IP device, Android Phone or Tablet/Slate docking device. The CM6533 /CM6533N /CM6533X1 is patible with USB Audio Class 1.0 and USB 2.0 Full-Speed, thus it can plug & play without any additional software installation on major operating systems. The internal DAC and ADC support from 8 ~ 96 KHz sampling rate and 16/24 bits resolution. The CM6533/CM6533N/CM6533X1 integrates equalizer on both playback and recording paths to pensate the frequency response of microphone and headphone. The CM6533/CM6533N/CM6533X1 also integrates 256K Byte flash (Including 32KB F/W programming size) and crystal but requires few passive ponents to make a finish product. Thus, it can save the total BOM cost and PCB area can be smaller. FEATURES - USB 2.0 Full-Speed pliant - USB Audio Class 1.0 pliant - USB Human Interface Device (HID) Class 1.11 pliant - Two (2)-channel DAC for audio output interface - Two (2)-channel ADC for audio input interface - Supports Digital Microphone interface - Built-in S/PDIF transmitter - Built-in Equalizer on both playback and recording paths - Supports USB suspend/resume/reset functions - Supports control, interrupt, bulk, and isochronous data transfers - Embedded 1T 8051 with 32K Byte SRAM and 256K Byte flash(Including 32KB F/W programming size) - Supports OMTP and CTIA auto switch on a 4-pole jack - Integrated Tri-Colors PWM LED driver - Master/Slave H/W I2C/SPI/UART control interface for external audio devices or FLASH access - Supports embedded oscillator without external crystal - Built-in 30m W @ R=32 headphone amplifier - On chip watchdog timer BLOCK DIAGRAM USB...