DESCRIPTION
Remarks O Tearing signal output. If not used, please open this pin. P Ground I Data enable signal in RGB mode. If not used, please fix this pin to GND. I Pixel clock signal in RGB mode. If not used, please fix this pin to GND. I Vertical sync. signal in RGB mode. If not used, please fix this pin to GND. P Ground I Horizontal sync, signal in RGB mode. If not used, please fix this pin to GND. I I MPU system interface mode select Note I P Digital POWER P Analog POWER Serial data in/out pin in DBI Type C 9bit mode Serial I/O data input pin in DBI Type B 8bit mode. If not used, please fix this pin to GND. O Serial data output pin. If not used, please fix this pin to GND. I/O Data Bus I/O Data Bus I/O Data Bus I/O Data Bus I/O Data Bus I/O Data Bus I/O Data Bus I/O Data Bus I/O Data Bus I/O Data Bus I/O Data Bus I/O Data Bus I/O Data Bus I/O Data Bus I/O Data Bus I/O Data Bus I/O Data Bus I/O Data Bus I Reset pin I Read strobe signal. If no used, please connect this pin to IOVCC...
