CS0550BL Datasheet | CUI

Additional Resources: Product Page | 3D Model | PCB Footprint SERIES: CSXX50BL │ DESCRIPTION: CURRENT SENSOR Features - open loop - bipolar - low noise - single channel date 09/05/2019 page 1 of 4 MODEL CS0350BL rated current (If) (ARMS) ±3 linearity range1 (Im) (APEAK) ±4.5 ±5 ±7.5 CS1050BL ±10 ±15 CS1550BL ±15 ±22.5 CS2050BL ±20 ±30 Notes: 1. Im is the maximum peak current for which the output voltage specifications are guaranteed, however the If RMS rating must not be exceeded. 1. All specifications measured at 25°C, Rl=10 kΩ, unless otherwise noted. 2. It is remended to add a 1 μF capacitor connected between the mon terminal 4 and the +5 V and -5 V terminals, 1 and 2, to avoid noise problems. SPECIFICATIONS parameter supply voltage (Vcc) max current consumption (Ic) output voltage (Vo) zero current offset voltage (Vr) output voltage linearity4 (ΔKo) response (tr) output voltage temperature characteristics zero current offset voltage characteristics hysteresis (Vh) conditions/description at +If after demagnetization at di/dt = If/μs at +If to zero current min ±4.75 ±1.98 -0.02 typ ±5.00 ±2.00 0 7 max ±5.25 25 ±2.02 +0.02 ±0.5 ±0.1 ±1.5 8 units V m A V V % μs %/°C m V/°C m V primary over current for maximum 50 ms, no damage withstand voltage between coil and each terminal for 1 minute insulation resistance between coil and each terminal at 500 Vdc operating temperature storage temperature safety approvals UL 508 flammability...