Datasheet4U Logo Datasheet4U.com

CS1050BL - CURRENT SENSOR

General Description

CURRENT SENSOR

Key Features

  • open loop.
  • bipolar.
  • low noise.
  • single channel date 09/05/2019 page 1 of 4 MODEL CS0350BL rated current (If) (ARMS) ±3 linearity range1 (Im) (APEAK) ±4.5 CS0550BL ±5 ±7.5 CS1050BL ±10 ±15 CS1550BL ±15 ±22.5 CS2050BL ±20 ±30 Notes: 1. Im is the maximum peak current for which the output voltage specifications are guaranteed, however the If RMS rating must not be exceeded. 1. All specifications measured at 25°C, Rl=10 kΩ, unless.

📥 Download Datasheet

Datasheet Details

Part number CS1050BL
Manufacturer CUI
File Size 323.97 KB
Description CURRENT SENSOR
Datasheet download datasheet CS1050BL Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CS1050L Current Sensors Coilcraft
CS105N08A8 Silicon N-Channel Power MOSFET CR Micro
CS105N08B8 Silicon N-Channel Power MOSFET CR Micro
CS105N15A0 Silicon N-Channel Power MOSFET CR Micro
CS105N15A8 Silicon N-Channel Power MOSFET CR Micro

Other Datasheets by CUI

Part Number Description
CS1005U CURRENT SENSOR
CS1505U CURRENT SENSOR
CS1550BL CURRENT SENSOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Additional Resources: Product Page | 3D Model | PCB Footprint SERIES: CSXX50BL │ DESCRIPTION: CURRENT SENSOR FEATURES • open loop • bipolar • low noise • single channel date 09/05/2019 page 1 of 4 MODEL CS0350BL rated current (If) (ARMS) ±3 linearity range1 (Im) (APEAK) ±4.5 CS0550BL ±5 ±7.5 CS1050BL ±10 ±15 CS1550BL ±15 ±22.5 CS2050BL ±20 ±30 Notes: 1. Im is the maximum peak current for which the output voltage specifications are guaranteed, however the If RMS rating must not be exceeded. 1. All specifications measured at 25°C, Rl=10 kΩ, unless otherwise noted. 2. It is recommended to add a 1 μF capacitor connected between the common terminal 4 and the +5 V and -5 V terminals, 1 and 2, to avoid noise problems.