GMC10X7R104K50NT Datasheet | Cal - Chip Electronics

features such as large capacitance values in small sizes and excellent high frequency characteristics. Moreover, chip capacitors can be used on surface mount assembly equipment. Our fully integrated manufacturing and total quality control systems ensure unprecedented high standards of quality and reliability. Chip Capacitor Selection Dielectric Type The choice of dielectric is largely determined by the temperature stability required. Selection of the most suitable capacitor for any application is based on the following: COG (NPO) Capacitance change with temperature is 0-30ppm/°C which is less than -0.3%°C from -55°C to +125°C. Typical capacitance change with life is less than -0.1% for NPOs, one-fifth that shown by most other dielectrics. NPO formulations show no aging characteristics. X7R/X5R Its temperature variation of capacitance is within ±15% from -55°C to +125°C (-55°C to +85°C for X5R). The capacitance change is non-linear. Z5U Despite their capacitance instability, Z5U formulations are very popular because of their small size, temperature range low ESL, low ESR and excellent frequency response. These features are particularly important for decoupling application where only a minimum capacitance value is required. Y5V Y5V formulations are for general purpose use in a limited temperature range. They have a wide temperature characteristic of +22% - 82% capacitance change over the operating temperature range of -30°C to +85°C. Y5Vs high dielectric constant allows the manufacture of very high capacitance values (up to 22MF) in small physical sizes. Capacitance Value & Tolerance Determined by circuit requirements. Note that chip prices decrease with lower capacitance value and looser tolerance. Voltage Determined by circuit requirements. Units are designed to exceed the withstanding voltage specification, i.e., the user need not incorporate an additional safety margin. w w .D w t a S a e h t e U 4 .c m o Capacitor Size Select the...