CLM1117 Datasheet | Calogic LLC

FEATURES PRODUCT DESCRIPTION The Calogic CLM1117 is a low power positive voltage regulator designed to meet 800m A output current and ply with SCSI-II specifications with a fixed output voltage of 2.85V. This device is an excellent choice for use in batterypowered applications, as active terminators for the SCSI bus, and portable puters. The CLM1117 features very low quiescent current and very low dropout voltage of 1.2V at a full load and lower as output current decreases. This product is available as an adjustable or fixed 2.85V, 3V, 3.3V, and 5V output voltages. The device is offered in a 3-pin surface mount package SOT-223. The output capacitor of 10µF or larger is needed for output stability of CLM1117 as required by most of the other regulator circuits. ORDERING INFORMATION Part CLM1117M CLM1117M-X Package SOT-223 SOT-223 Temperature Industrial Industrial - - - - - - - - - - - - - - - - - Guaranteed 800m A Output Three Terminal Adjustable or Fixed 2.85V, 3V, 3.3V, 5V, 10V & 12V Very Low Quiescent Current Low Dropout Voltage of 1.2 Volts at Full Load Extremely Tight Load and Line Regulation Very Low Temperature Coefficient Fixed 2.8V Device for SCSI-II Active Terminator Logic-Controlled Electronic Shutdown Internal Overcurrent Limiting & Thermal Overload Protection Surface Mount Package SOT-223 APPLICATIONS SCSI-II Active Terminator Portable/ Palm Top / Notebook puters Battery Chargers Disk Drives Portable Consumer Equipment Portable Instrumentation SMPS Post-Regulator X = Output Voltage. 5V = Standard. Contact factory for 2.85V, 3.0V, 3.3V, 10V and 12V. PIN CONNECTIONS SOT-223 TAB IS GND CLM1117 1 2 3 ADJ./GND VOUT 1N-12 FRONT VIEW CALOGIC CORPORATION, 237 Whitney Place, Fremont, California 94539, Telephone: 510-656-2900, FAX: 510-651-3025 CORPORATION ABSOLUTE MAXIMUM RATINGS Power Dissipation - - - - . Internally Limited Lead Temp. (Soldering, 5 Seconds) - - - 260o C Storage...