DMB51CM24 Datasheet | Carlo Gavazzi

Description Multi-voltage timer with 7 knob-selectable functions and 7 knob-selectable time ranges within 0.1s and 100h. For mounting on DIN-rail. 17.5 mm wide housing suitable both for back and front panel mounting. Ordering Key Housing Function Type Item number Output Power supply DMB 51 C M24 Type Selection Mounting DIN-rail Output SPDT Housing Mini-D Supply: 24 VDC and 24 to 240 VAC DMB51CM24 Time Specifications Time ranges Knob selectable 0.1 to 1 s 1 to 10 s 6 to 60 s 60 to 600 s 0.1 to 1 h 1 to 10 h 10 to 100 h ≤ 5% ≤ 0.2% ≤ 0.05%/V ≤ 0.2%/°C Close the trigger contact between pins A1 and Y1 ≥ 100 ms ≥ 200 ms Output Specifications Output Rated insulation voltage Contact Ratings (Ag Sn O2) Resistive loads AC 1 DC 12 Small inductive loads AC 15 DC 13 Mechanical life Electrical life Operating frequency Dielectric strength Dielectric voltage Rated impulse withstand voltage SPDT relay 250 VAC (rms) µ 8 A @ 250 VAC 5 A @ 24 VDC 2.5 A @ 250 VAC 2.5 A @ 24 VDC ≥ 30 x 106 operations ≥ 105 operations (at 8 A, 250 V, cos ϕ = 1) < 7200 operations/h 2 k VAC (rms) 2.5 k V (1.2/50 µs) Setting accuracy Repeatability Time variation Within rated power supply Within ambient temperature Reset Manual reset of time and/or relay Pulse duration Power supply interruption .. .. Specifications are subject to change without notice (06.11.00) DMB51 Supply Specifications Power supply Rated operational voltage through terminals: A1, A2 Overvoltage cat. II (IEC 60664, IEC 60038) 24 VDC ± 15% and 24 to 240 VAC + 10% -15%, 45 to 65 Hz ≤ 10 ms 1.5 W General Specifications Power ON delay Indication for Power supply status Output status Environment Degree of protection Pollution degree Operating temperature Storage temperature Weight Screw terminals Tightening torque Approval EMC Immunity Emission ≤ 100 ms LED, green LED, yellow (flashing when timing) (EN 60529) IP 20 2 (IEC 60664) -20° to +60°C, R.H. < 95% -30° to +80°C, R.H. < 95% 75 g Max. 0.5 Nm according to IEC 60947 UL...