SMV0402ExxxxxxRR
SMV0402ExxxxxxRR is Zinc Oxide manufactured by Ceramate Technical.
DESCRIPTION plies with Ro HS Yes Standard Lead content < 1000ppm Reflow solder profile 250 ℃ temperature (Remend)
L W T(max.) 1.00 ± 0.10 0.50 ± 0.10 0.60 0.25 ± 0.1
Dimensions a
..
TYPE SMV0402E-
- -
- -
- -
- RR MODEL CITATION SUBJECT DATE
PAGE
2/9
Feb. 13, 2009
Electrical Characteristics
REV.
C01
2. ELECTRICAL CHARACTERISTICS
N0. 2.0 ITEM Standard Conditions Maximum Allowable Voltage Varistor Voltage Varistor Voltage Temperature Coefficient Max. Clamping Voltage ESD Trigger Voltage (VT) Response time Leakage current Capacitance AC :
- (1) Vrms DC :
- (1) V V0.1m A :
- (1) V 0 ~
- 0.05 %/°C
- (1) V at 1 A
<- (1)V Trise < 1 n S ILDC ILDCA
PERFORMANCE
2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8
TEST METHODS Unless otherwise specified, all tests are made under environmental conditions as given below: Temperature: 5~35°C Relative humidity: 45~85 % RH Maximum continuous sine wave(RMS) or DC voltage which may be applied. Voltage across the varistor measured at Cm A DC.
Peak voltage across the varistor with a specified peak impulse current of 8x20μs waveform.
<- (1)μΑ <- (1)μA
- (1) p F. at V1m A×80% at V1m A×80% (After ESD Test) Capacitance shall be measured at 1 MHz,1 Vrms max. 0V bias and 20±2℃
- (1) See table 2.1 Electrical Characteristics
..
TYPE SMV0402E-
- -
- -
- -
- RR MODEL CITATION SUBJECT Electrical Characteristics DATE REV.
PAGE
3/9
Feb. 13,...
