CS5205-5 Datasheet | Cherry Semiconductor Corporation

Description The CS5205-X series of linear regulators provides 5A at adjustable and fixed voltages with an accuracy of ±1% and ±2% respectively. The adjustable version uses two external resistors to set the output voltage within a 1.25V to 13V range. The regulators are intended for use as post regulators and microprocessor supplies. The fast loop response and low dropout voltage make these regulators ideal for applications where low voltage operation and good transient response are important. The circuit is designed to operate with dropout voltages as low as 1V depending on the output current level. The maximum quiescent current is only 10m A at full load. The regulators are fully protected against overload conditions with protection circuitry for Safe Operating Area (SOA), overcurrent and thermal shutdown. The CS5205-X is pin patible with the LT1084 family of linear regulators but has lower dropout voltage. The regulators are available in TO220 and surface mount D2 packages. Features s Output Current to 5A s Output Trimmed to +/- 1% s Dropout Voltage 1.2V @ 5A s Fast Transient Response s Fault Protection Circuitry Thermal Shutdown Overcurrent Protection Safe Area Protection Block Diagram CS5205-1 V OUT V IN Package Options 3L TO-220 Tab (VOUT) Output Current Limit Thermal Shutdown + Error Amplifier Adj 3L D2PAK Bandgap CS5205-3, -5 V OUT V IN Output Current Limit Thermal Shutdown + Error Amplifier 1 2 3 CS5205-1 Adj VOUT VIN 1 2 3 CS5205-3, -5 Gnd VOUT VIN Bandgap Gnd Cherry Semiconductor Corporation 2000 South County Trail, East Greenwich, RI 02818 Tel: (401)885-3600 Fax: (401)885-5786 Email: info@cherry-semi. Web Site: .cherry-semi. Rev. 6/12/97 ¨ pany CS5205-1,-3,-5 Absolute Maximum Ratings Supply Voltage, VCC 17V Operating Temperature Range...