CS5231-3 Datasheet | Cherry Semiconductor Corporation

Description The CS5231-3 bines a threeterminal linear regulator with circuitry to control an external PFET transistor with the intent of managing two input supplies. A 5V supply powers the regulator while an auxiliary 3.3V supply is controlled by the IC. The design has been optimized to provide a “glitch-free” transition between the two supplies. The CS5231-3 linear regulator provides a fixed 3.3V output @ 500m A with an overall accuracy of ± 2%. The NPN-PNP posite pass transistor provides a low dropout voltage and requires less supply current than PNP designs. Full protection including current limit and thermal shutdown is provided. Also designed for low reverse current, the IC prevents excessive current from flowing from the output to ground if the regulator input voltage is lower than the output voltage. The CS5231-3 also controls an auxiliary supply that can provide power to the regulator output when input voltage for the regulator is not available. The Aux Drv auxiliary output is normally pulled up to the regulator input voltage and drives low whenever the input voltage drops below 4.4V (nominal). It is typically used to control a PFET switch that connects a 3.3V auxiliary supply to the regulator output. The CS5231-3 is available in a 5-lead D2PAK (TO-263) package. Applications include Network Interface Cards (NICs), modem cards and power supplies with multiple input sources. Features Linear Regulator s 3.3V ± 2% Output Voltage s 3m A Quiescent Current @ 500m A s Fast Transient Response s Current Limit s Thermal Shutdown with Hysteresis s 450µA Reverse Output Current s Fast Transient Response System Power Management s Auxiliary Supply Control Package Options 5 Lead D2PAK VOUT Block Diagram VIN 10kΩ 50kΩ Internal Bias Current Limit - Aux Drv VIN UV parator Bandgap Reference Gnd Thermal Shutdown + Error Amp Shutdown - + 1. No Connect 2. VIN 3. Gnd 4. VOUT 5. Aux Drv Tab = Gnd VREF Consult factory for other package options. Cherry Semiconductor...