CS8156 Datasheet PDF - Cherry Semiconductor Corporation 12V/ 5V Low Dropout Dual Regulator with ENABLE Specs

CS8156 - 12V/ 5V Low Dropout Dual Regulator with ENABLE

Datasheet Summary

Description

The CS8156 is a low dropout 12V/5V dual output linear regulator.

The 12V ± 5% output sources 750mA and the 5V ±2.0% output sources 100mA.

The on board ENABLE function controls the regulatorÕs two outputs.

Features

s Two regulated outputs 12V ±5.0%; 750mA 5V ±2.0%; 100mA s Very low SLEEP mode current drain 200nA s Fault Protection Reverse Battery +60V, -50V Peak Transient Voltage Short Circuit Thermal Shutdown s CMOS Compatible ENABLE Absolute Maximum Ratings Input Voltage Operating Range -0.5V to 26V Peak Transient Voltage (Load Dump = 46V) 60V Internal Power Dissipation Internally Limited Operating Temperature Range-40¡C to +125¡C Junction Temperature Range-40¡C to +150¡C Storage Temperature Range -65¡C.

Datasheet Details

Part number	CS8156
Manufacturer	Cherry Semiconductor Corporation
File Size	172.57 KB
Description	12V/ 5V Low Dropout Dual Regulator with ENABLE
Datasheet	CS8156 Datasheet
Additional preview pages of the CS8156 datasheet.

📁 Similar Datasheet

CS8156 - Low Dropout Dual Regulator (ON Semiconductor)

CS8151 - 100mA Low Dropout Linear Regulator (ON Semiconductor)

CS8151C - 100mA Low Dropout Linear Regulator (ON Semiconductor)

CS8101 - Low Dropout Linear Regulator (ON Semiconductor)

CS810N3A - TRIACS (JILIN SINO)

CS8118E - Built-in 16x gain mono Class-D audio power amplifier (ChipSourceTek)

CS8120 - Linear Regulator (ON Semiconductor)

CS8121S - Filterless Class-D audio amplifier (Chipstar Micro-electronics)

CS8122 - Low Dropout Linear Regulator (ON Semiconductor)

CS8122S - 3.0W mono ultra-low EMI / filterless Class-D audio amplifier (Chipstar)

Full PDF Text Transcription

Click to expand full text

CS8156 CS8156 12V, 5V Low Dropout Dual Regulator with ENABLE Description The CS8156 is a low dropout 12V/5V dual output linear regulator. The 12V ± 5% output sources 750mA and the 5V ±2.0% output sources 100mA. The on board ENABLE function controls the regulatorÕs two outputs. When the ENABLE lead is low, the regulator is placed in SLEEP mode. Both outputs are disabled and the regulator draws only 200nA of quiescent current. The regulator is protected against overvoltage conditions. Both outputs are protected against short circuit and thermal runaway conditions. The CS8156 is packaged in a 5 lead TOÐ220 with copper tab. The copper tab can be connected to a heat sink if necessary. Features s Two regulated outputs 12V ±5.0%; 750mA 5V ±2.

Published: Mar 24, 2005 |