CS8371 Datasheet | Cherry Semiconductor Corporation

Description The CS8371 is a 8V/5V dual output linear regulator. The 8V ±5% output sources 1A, while the 5V ±5% output sources 250m A. Each output is controlled by its own ENABLE lead. Setting the ENABLE input high turns on the associated regulator output. Holding both ENABLE inputs low puts the IC into sleep mode where current consumption is less than 10µA. The regulator is protected against overvoltage, short-circuit and thermal runaway conditions. The device can withstand 45V load dump transients making suitable for use in automotive environments. CherryÕs proprietary No Capª solution is the first technology which allows the output to be stable without the use of an external capacitor. The CS8371 is available in a 7 lead TO-220 package with copper tab. The tab can be connected to a heatsink if necessary. Features s Two Regulated Outputs 8V ±5%, 1A 5V ±5%, 250m A s Independent ENABLE for each Output s Separate Sense Feedback Lead for 8V Output s <10µA Sleep Mode Current s Fault Protection Overvoltage Shutdown +45V Peak Transient Voltage Short Circuit Thermal Shutdown s CMOS patible, Low Current ENABLE Inputs Block Diagram VCC Overvoltage Shutdown ENABLE1 Current Limit + VOUT1 Package Options TO-220 7 Lead Tab (Gnd) 1.2V Trimmed Bandgap Voltage Reference Thermal Shutdown + - ENABLE2 Gnd No Cap is a trademark of Cherry Semiconductor Corporation, and is patented. Rev. 6/9/99 + - 1.2V - + Pre-Regulator/ Bias Generator Sense VIA VOUT2 Current Limit 1 ENABLE 1 2 ENABLE 2 3 VOUT2 4 Gnd 5 Sense 6 VCC 7 VOUT1 Cherry Semiconductor Corporation 2000 South County Trail, East Greenwich, RI 02818 Tel: (401)885-3600 Fax: (401)885-5786 Email: info@cherry-semi. Web Site: .cherry-semi. ¨ pany Absolute Maximum Ratings Power Dissipation Internally Limited ENABLE Input Voltage Range...