FM32
Overview
The FM32 is 32M-bit Serial Peripheral Interface(SPI) Flash memory, and supports the Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (/WP), and I/O3 (/HOLD).
- Serial Peripheral Interface (SPI) - Standard SPI: SCLK, /CS, SI, SO, /WP, /HOLD - Dual SPI: SCLK, /CS, IO0, IO1, /WP, /HOLD - Quad SPI: SCLK, /CS, IO0, IO1, IO2, IO3
- Read - Normal Read (Serial): 55MHz clock rate - Fast Read (Serial): 108MHz clock rate with 30PF load - Dual I/O data transfer up to 216Mbits/S - Quad I/O data transfer up to 432Mbits/S -Continuous Read with 8/16/32/64-byte Wrap
- Program k - Serial-input Page Program up to 256bytes - Program Suspend and Resume e
- Erase - Block erase (64/32 KB) T - Sector erase (4 KB) e - Chip erase - Erase Suspend and Resume rc
- Program/Erase Speed - Page Program time: 0.6ms typical - Sector Erase time: 50ms typical u - Block Erase time: 0.15/0.25s typical o - Chip Erase time: 15s typical
- Flexible Architecture - Sector of 4K-byte S - Block of 32/64K-byte ip
- Low Power Consumption - 20mA maximum active current - 5uA maximum power down current h
- Software/Hardware Write Protection C- 3x512-Byte Security Registers with OTP Locks WSON (6*5mm) SOP 208-mil - Discoverable Parameters (SFDP) register - Enable/Disable protection with WP Pin - Write protect all/portion of memory via software - Top or Bottom, Sector or Block selection
- Single Supply Voltage TEL: +86-0755-27595155 27595165 FAX: +86-0755-27594792 WEB:Http:// E-mail: Sales@ @ FM32 (：CST-IC1567) - Full voltage range: 2.7~3.6V
- Temperature Range - Commercial (0℃ to +70℃) - Industrial (-40℃ to +85℃)
