Datasheet4U Logo Datasheet4U.com

HS2105 - Unipolar Hall EffectiveSensor

General Description

The HS2105 device is a low-power digital switch Unipolar Hall effect sensor, designed for the most compact and battery-sensitive systems.

The total power consumption in normal operation is typically 2μW with a 1.8V power source.

Key Features

  • CMOS Hall IC Technology.
  • Strong RF noise protection.
  • 1.8 to 5.5V for battery-powered.

📥 Download Datasheet

Datasheet Details

Part number HS2105
Manufacturer Chiprise
File Size 631.47 KB
Description Unipolar Hall EffectiveSensor
Datasheet download datasheet HS2105 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HS2108 DC / DC Boost Converter Hang Shun
HS2-2520RH-Q Radiation Hardened Uncompensated/ High Slew Rate Operational Amplifier Intersil Corporation
HS2-2620RH-Q Radiation Hardened/ Very Wideband/ High Input Impedance Uncompensated Operational Amplifiers Intersil Corporation
HS2-2622RH-Q Radiation Hardened/ Very Wideband/ High Input Impedance Uncompensated Operational Amplifiers Intersil Corporation
HS2-2700RH-Q Low Power/ High Performance Radiation Hardened Operational Amplifier Intersil Corporation

Other Datasheets by Chiprise

Part Number Description
HS2105NSC Unipolar Hall EffectiveSensor
HS2105SDR Unipolar Hall EffectiveSensor
HS2105SSE Unipolar Hall EffectiveSensor
HS2105STC Unipolar Hall EffectiveSensor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HS2105 Low-Power、Unipolar Hall Effective Sensor GENERAL DESCRIPTION The HS2105 device is a low-power digital switch Unipolar Hall effect sensor, designed for the most compact and battery-sensitive systems. The total power consumption in normal operation is typically 2μW with a 1.8V power source. North pole or South pole of sufficient strength will turn the output on. The output will be turned off under no magnetic field. While the magnetic flux density B is larger than operating point BOP, the output will be turned on (low), the output is held until B is lower than release point BRP, and then turned off. By incorporating an internal oscillator, the device samples the magnetic field and updates the output at a rate of low frequency for the lowest current consumption.