CH7024 Datasheet | Chrontel

Features - TV encoder targeting handheld and similar systems - Support for NTSC, PAL - Video output support for CVBS or S-video - Programmable 24-bit/18-bit/16-bit/15-bit/12-bit/8-bit digital input interface supporting various RGB and YCr Cb (e.g. RGB565, RGB666, RGB888, ITU656 like YCr Cb, etc.) input data formats - Support for input resolutions up to 720x480 and 720x576 (e.g. 220x176, 320x240, 640x480, 720x480, 720x576, etc.) - Adjustable brightness, contrast, hue and saturation. - Detect TV / Monitor connection - Two high quality10-bit video DAC outputs - Fully programmable through serial port - Flexible pixel clock frequency from graphics controller (2.3MHz- 64MHz) - Flexible input clock on the crystal or oscillator (2.3MHz- 64MHz) - Flexible up and down scaling on the display - Master and slave mode - Offered in 48-pin LQFP Package - IO voltage and SPC/SPD from 1.2V to 3.3V - Programmable power management - Power down current less than 20u A typical - Power consumption of <150m W for one CVBS output, single terminated and <350m W for two DAC outputs, double terminated. General Description The CH7024 is a TV encoder device targeting handheld, portable video applications such as digital still cameras and similar portable embedded systems. The device is able to encode the video signals and generate synchronization signals for NTSC and PAL standards. Supported TV output formats are NTSC-M, NTSC-J, NTSC-433, PAL-B/D/G/A/I, PAL-M, PAL-N and PAL60. The device accepts different data formats including RGB and YCr Cb (e.g. RGB565, RGB666, RGB888, ITU656 like YCr Cb, etc.) via 24 bit/18 bit/15 bit /12 bit /8 bit multiplexed digital inputs. Most embedded controllers are supported. The I/O interface voltage between CH7024 and digital video source controller can be selected by the I/O supply voltage (VDDIO). The I/O supply voltage range is from 1.2V to 3.3V. The digital input voltage will follow the I/O supply voltage. CH7024 is offered in 48-pin LQFP package (7 x 7 mm). CH7024...