WM8214 Datasheet | Cirrus Logic

DESCRIPTION The WM8214 is a 16-bit analogue front end/digitiser IC which processes and digitises the analogue output signals from CCD sensors or Contact Image Sensors (CIS) at pixel sample rates of up to 40MSPS. The device includes three analogue signal processing channels each of which contains Reset Level Clamping, Correlated Double Sampling and Programmable Gain and Offset adjust functions. Three multiplexers allow single channel processing. The output from each of these channels is time multiplexed into a single high-speed 16-bit Analogue to Digital Converter. The digital output data is available in 8bit wide multiplexed format and there is also an optional single byte output mode, or 4-bit multiplexed LEGACY mode. An internal 4-bit DAC is supplied for internal reference level generation. This may be used during CDS to reference CIS signals or during Reset Level Clamping to clamp CCD signals. An external reference level may also be supplied. ADC references are generated internally, ensuring optimum performance from the device. Using an analogue supply voltage of 3.3V and a digital interface supply of 3.3V, the WM8214 typically only consumes 390m W. BLOCK DIAGRAM FEATURES - 16-bit ADC - 40MSPS conversion rate - Low power - 390m W typical - 3.3V single supply operation - Single, 2 or 3 channel operation - Correlated double sampling - Programmable gain (9-bit resolution) - Programmable offset adjust (8-bit resolution) - Flexible clamp control with programmable clamp voltage - Flexible timing, can be made patible with WM819X and WM815X parts. - 8-bit wide multiplexed data output format - 8-bit only output mode - 4-bit LEGACY multiplexed nibble mode - Internally generated voltage references - 28-lead SSOP package, pin patible with WM8199 - Serial control interface APPLICATIONS - High speed USB2.0 patible scanners - Multi-function peripherals - High-performance CCD sensor interface - Digital Copiers VRLC/VBIAS RSMP VSMP MCLK AVDD DVDD1 DVDD2 VRT VRX VRB RINP...