1008AF-901XJLC Datasheet | Coilcraft

Document 578-1 Chip Inductors - 1008AF (2520) - Lowest DCR and highest current rating of our 1008 size inductors - Available in 14 inductance values from 0.9 to 10 µH. Request free evaluation samples by contacting Coilcraft or visiting .coilcraft..   Part number1   Inductance2 Percent (µH)   tolerance3 Q typ4   SRF min5   DCR max6   Isat7   Irms8 (MHz) (Ohms)(A) (A) 1008AF-901X_L_0.9 10,5 1008AF-112X_L_1.1 10,5 1008AF-132X_L_1.3 10,5 1008AF-152X_L_1.5 10,5 1008AF-192X_L_1.9 10,5 1008AF-222X_L_2.2 10,5 1008AF-272X_L_2.7 10,5 1008AF-332X_L_3.3 10,5 1008AF-392X_L_3.9 10,5 1008AF-472X_L_4.7 10,5 1008AF-582X_L_5.8 10,5 1008AF-682X_L_6.8 10,5 1008AF-822X_L_8.2 10,5 1008AF-103X_L_10.0 10,5 25 24 37 22 29 21 22 21 21 27 21 20 20 22 415 376 198 135 126 106 70 59 55 48 37 33 34 26 0.1001.4 1.3 0.1051.3 1.2 0.1101.2 1.1 0.1251.1 1.0 0.1401.0 1.0 0.155 0.950.95 0.190 0.800.90 0.210 0.750.80 0.220 0.700.80 0.435 0.700.65 0.280 0.550.75 0.315 0.500.70 0.395 0.500.65 0.480 0.450.55 1. When ordering, specify tolerance, termination and packaging codes: 1008AF-103XJLC Tolerance:J = 5%  K = 10% (Table shows stock tolerances in bold.) Termination:L=Ro HS pliant silver-palladium-platinum-glass frit. Special order: T = Ro HS tin-silver-copper (95.5/4/0.5) or S = non-Ro HS tin-lead (63/37). Packaging:C=7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D=13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel). 2. Inductance measured at 2.5 MHz using Coilcraft SMD-A fixture in an Agilent/HP 4286A impedance analyzer with Coilcraft-provided correlation pieces. 3. Tolerances in bold are stocked for immediate shipment. 4. Q...