HA3588-BL
HA3588-BL is Power Inductors manufactured by Coilcraft.
Document 716-1
Power Inductor
- HA3588-BL
- Designed for high current power supply applications
- Saturation current of 37 Amps
- Flat wire windings provide exceptionally low DC resistance
- Vertical mounting provides a small footprint
Core material Ferrite Terminations Ro HS pliant tin-silver over copper. Other terminations available at additional cost. Weight 37 g Ambient temperature
- 40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature ponent:
- 40°C to +85°C. Tray packaging:
- 40°C to +80°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 25 parts per tray PCB washing Only pure water or alcohol remended
Part number
Inductance1 ±10% (µH)
DCR max2 SRF typ3 Isat (A)4
Irms (A)5
(m Ohms)
(MHz)
10% drop 20% drop 30% drop 20°C rise 40°C rise
HA3588-BL10.0 2.6173034371926
1. Inductance tested at 300 k Hz, 0.1 Vrms on Agilent/HP 4192A. 2. DCR measured on a Keithley 580 micro-ohmmeter or equivalent. 3. SRF measured on an Agilent/HP 8753ES network analyzer. 4. DC current at which the inductance drops the specified amount from its value without current. 5. Current that causes the specified temperature rise of the winding from
25°C ambient. Temperature rise of the core is usually less than that of the winding. 6. Electrical specifications at 25°C.
0.872 ±0.024 22,15 ±0,61
1.05 ±0.02 26,67 ±0,51
HA3588-BL XXXX X
Parts manufactured prior to September 2011 may be marked differently.
0.648 ±0.02 16,46 ±0,51
Caution: This series is not intended for use in high vibration or mechanical shock environments. We advise using additional means of securing the part to the circuit board to ensure its adhesion.
0.50 12,7
0.030 0,76
0.130 ±0.01 3,3 ±0,254
0.133 3,38 CL
0.150 3,81
CL 0.230...
