Comlinear CLC006
The CLC006 is a monolithic cable driver, designed to conform to the SMPTE 259M standard for the transmission of serial digital video signals. The CLC006 operates at data rates from DC to over 400Mbps, with nominal rise and fall times of 650ps. When used with a back-matching resistor to drive a terminated cable, the result is a 0.8Vpp swing at the load.| Part No. | CLC006 |
|---|---|
| Datasheet | CLC006 Download |
| Manufacturer | Comlinear |
| Description | Serial Digital Cable Driver |
| Buy | Stock & Price |
APPLICATIONS
:● Digital video routers, DAs, switchers
● 4fSC, 4:2:2 and 360Mbps serial digital video interfaces
● Lower power replacement for GS9008 in most applications
● Cable driver for digital data transmission
FEATURES
:● No external pull-down resistors required
● Two amplitude-adjustable outputs
● 650ps rise and fall times
● Operates from single +5V or -5.2V supply
● Low power dissipation
● DC to >400Mbps
DESCRIPTION
An internal bandgap reference defines an accurate, low drift, 1.6Vpp output swing at each of two outputs. With the addition of one external resistor the output swing may be adjusted from the nominal 1.6Vpp down to 0.7Vpp. With three external resistors the output swing can be adjusted from 0.7Vpp to greater than 2Vpp. The CLC006 draws less quiescent current than other solutions, and requires no external pull-down resistors to bias the outputs. The result is low power dissipation (185mW with both outputs loaded) and less board space used. The DC coupled differential inputs may be driven with ECL level signals or with DC-shifted ECL signals.
