CDLL02A20
CDLL02A20 is 0.2 & 0.5 AMP SCHOTTKY BARRIER RECTIFIERS manufactured by Compensated Deuices Incorporated.
- 1N6677UR-1 AVAILABLE IN JAN, JANTX, JANTXV AND JANS PER MIL-PRF-19500/610
- 0.2 & 0.5 AMP SCHOTTKY BARRIER RECTIFIERS
- HERMETICALLY SEALED
- LEADLESS PACKAGE FOR SURFACE MOUNT
- METALLURGICALLY BONDED
- DOUBLE PLUG CONSTRUCTION
1N6677UR-1 and CDLL6675 thru CDLL6677 and CDLL0.2A20 thru 40 and CDLL0.5A20 thru 40
MAXIMUM RATINGS, 0.2 AMP DEVICES
Operating Temperature: -65°C to +125°C Storage Temperature: -65°C to +150°C Average Rectified Forward Current: 0.2 AMP @ TEC = +100°C Derating: 8.0 m A / °C above +100°C ELECTRICAL CHARACTERISTICS @ 25°C, unless otherwise specified.
CDI TYPE NUMBER WORKING PEAK REVERSE VOLTAGE VRWM VOLTS CDLL6675 CDLL6676 CDLL6677 CDLL0.2A20 CDLL0.2A30 CDLL0.2A40 20 30 40 20 30 40 MAXIMUM REVERSE LEAKAGE CURRENT AT RATED VOLTAGE IR @ +25°C IR @ +100°C m A 0.6 0.6 0.6 0.6 0.6 0.6 MAXIMUM CAPACITANCE @ VR = 0 VOLTS f =1.0 MHz CT PICO FARADS 50 50 50 50 50 50
MAXIMUM FORWARD VOLTAGE VF @ 20 m A VF @ 200 m A VF @ 630 m A VOLTS 0.37 0.37 0.37 0.37 0.37 0.37 VOLTS 0.50 0.50 0.50 0.50 0.50 0.50 VOLTS 0.70 0.70 0.70 0.70 0.70 0.70
µA
5.0 5.0 5.0 5.0 5.0 5.0
DIM D F G G1 S
MILLIMETERS INCHES MIN MAX MIN MAX 1.60 1.70 0.063 0.067 0.41 0.55 0.016 0.022 3.30 3.70 .130 .146 2.54 REF. .100 REF. 0.03 MIN. .001 MIN.
FIGURE 1
DESIGN DATA
MAXIMUM RATINGS, 0.5 AMP DEVICES
Operating Temperature: -65°C to +125°C Storage Temperature: -65°C to +150°C Average Rectified Forward Current: 0.5 AMP @ TEC = +75°C Derating: 6.67 m A / °C above TEC = +75°C ELECTRICAL CHARACTERISTICS @ 25°C, unless otherwise specified.
MAXIMUM CAPACITANCE @ VR = 0 VOLTS f =1.0 MHz CT PICO FARADS 50 50 50
CASE: DO-213AA, Hermetically sealed glass case. (MELF, SOD-80, LL34) LEAD FINISH: Tin / Lead THERMAL RESISTANCE: (ROJEC): 100 ˚C/W maximum at L = 0 inch THERMAL IMPEDANCE: (ZJX): 20 ˚C/W maximum POLARITY: Cathode end is banded. MOUNTING SURFACE SELECTION: The Axial Coefficient of Expansion (COE) Of this Device is Approximately +6PPM/°C. The COE of the Mounting Surface System Should Be...
