DCx40 Datasheet | Condor

DCx40 DC/DC Converters Features - - - - - - - - 40 W dc/dc converter Same size as ac input version Drop-in replacement for GLC40 series Two input ranges: 24 V and 48 V Two-year warrranty Full off-line isolation Single and multiple output versions available marked to LVD ..net SPECIFICATIONS: Input DCD models: 24 Vdc, 18-32 Vdc; DCG models: 48 Vdc, 36-72 Vdc. Hold-up Time 6m Sec minimum from loss of dc input at full load, nominal line. power dissipation in some outputs. Consult factory for application assistance. Efficiency 68% minimum at full rated load, nominal input voltage, depending upon model and load distribution. Single-output models = 72% to 80% depending upon model. Output Power Normal continuous output power is 40 W (45 W Pk) for 60 sec. Output Regulation Regulation for multiple-output models measured by ±40% load change From 60% rated load with all other outputs at 60% full rated load and a line voltage change from low line to high line. Initial set tolerance is measured with all outputs at 60% of full rated load. Output voltage V1 requires 20% load for proper regulation of multiple-output models. Regulation for single-output models measured by changing load from 5% load to 50% load or 50% load to full load in either direction. Overshoot Less than 3% at turn-on under nominal conditions, inversely proportional to input voltage and temperature. Less than 2% overshoot at turn-off under all conditions. Turn-on Time Less than 1 sec. At nominal line, 25°C (inversely proportional to input voltage and thermistor temperature). Input Protection Internal fuse provided on all units. Inadvertent reverse voltage application will blow fuse without risk of fire or shock hazard. Otherwise, internal fuse is designed to protect against catastrophic circuit failures. Fuse does not blow on overload or short circuit. Remote Sense Standard on single-output versions. Capable of pensating for 0.25 V total of cabling losses in the output voltage. Overloa...