MSD534 Datasheet | Connor-Winfield

DESCRIPTION OPERATING SPECIFICATIONS PARAMETER Frequency Range Total Frequency Tolerance Operating Temperature Range Supply Voltage Supply Current Jitter (BW=10Hz to 20MHz) Jitter (BW=12k Hz to 20MHz) SSB Phase Noise at 10Hz offset SSB Phase Noise at 100Hz offset SSB Phase Noise at 1KHz offset SSB Phase Noise at 10KHz offset SSB Phase Noise at 100KHz offset (Vcc) (Icc) The Connor-Winfield MSD534 is a hermetically sealed surface mount 5.0V Crystal Controlled Oscillator (XO) HCMOS/TTL patible. The MSD534 is designed for applications requiring low jitter and tight stability. INPUT CHARACTERISTICS PARAMETER Tri-state Enable Voltage Tri-state Disable Voltage FEATURES 5.0V OPERATION LOW JITTER <1ps RMS HCMOS OUTPUT CHARACTERISTICS PARAMETER LOAD Voltage (High) (Low) Current (High) (Low) Duty Cycle at 50% of Vcc Rise / Fall Time 10% to 90% MINIMUM > 0.9(Vcc) -16 45 NOMINAL MAXIMUM 50 < 0.1(Vcc) 16 55 3 UNITS p F Vdc Vdc m A m A % n S FREQUENCY TOLERANCE: ±100ppm TABLE 4.0 NOTE TEMPERATURE RANGE: 0 to 70°C TRI-STATE ENABLE/DISABLE FUNCTION “J” LEADED SURFACE MOUNT PACKAGE TAPE AND REEL PACKAGING (Voh) (Vol) (Ioh) (Ioh) 50 1.5 PACKAGE CHARACTERISTICS Package TABLE 5.0 Hermetically sealed, ceramic package with gold plat ed J leads. .. ORDERING INFORMATION Note: 1) Inclusive of calibration, frequency vs. temperature stability, supply voltage change, load change, shock and vibration, 20 years aging. 2) Oscillator output is enabled with no connection on pad 1 HCMOS CLOCK SERIES - 125.00 MHz CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: Hc193 PAGE 1 OF 2 REV: 00 DATE: 10/7/02 a Copyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 PREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 581-5040. PHONE (630) 851-4722. .conwin. PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS .. Specifications subject to change without notice. DATA SHEET #: Hc193 PAGE 2 OF 2 REV: 00 DATE: 10/7/02 a Copyright 2001...