SMM201-24-12
SMM201-24-12 is Medical Single or Dual Output manufactured by Conversion Devices.
- Part of the SMM201 comparator family.
- Part of the SMM201 comparator family.
FEATURES
- -
- -
200 watt single or dual output ZVS power supply High Efficiency 90% typical Open PCB construction Output voltages: V1 Hi-current Main output available with any voltage from 12 to 60 V up to 16.7A current rating V2 Auxiliary output available with any voltage from 3.3 to 12.0 V rated up to 5.0A maximum Input
GENERAL SPECIFICATIONS
Input voltage ………………...Universal input 90 to 264 VAC Power Factor ………………..0.95 Frequency 47-63 Hz Input current………………….2.2A @ 115 VAC 1.2A @ 230 VAC Inrush current 35A @ 115 VAC max., cold start @ 25° C 70A @ 230 VAC Efficiency 90% typical at full load, nom. line EMI filter FCC Class “B”, CISPR 22 Class “B” and EN55022 Class B. Earth leakage current ..……..less than 135 µA @ 132 VAC input. Less than 270µA @ 264 VAC input. Lower leakage models optional. Contact factory for option code Isolation voltage: Input to output …...4200 VAC Input to chassis ….1500 VAC
- -
- -
- 150 watt convection rating Hi-density pact footprint of 3.0”W x 5.0”L x 1.38”H UL2601, IEC601 and CSA22.2 No. 601 pending Low leakage current less than 300 µA @ hi-line 264 VAC Dual AC fusing on both lines
Output
Output voltage …………….…See Table Output voltage trim ………….±1 V typical Maximum power 200 watts Minimum Load ……………….No minimum load required Start-up delay ………………..2 s max. Start-up rise time …………....2 ms Hold-up time >12 ms @ 150 W load, 115 VAC nominal line at factory voltage setting. Line Regulation ………….…..1% max., 0.5% typical Load Regulation ………..…...3% max., 1% typical Transient Response ………...4% max. deviation, 500 µs recovery time for a 50% load change Ripple & Noise ……………....1% pk-to-pk expressed as a percentage of output voltage. Measured at 20MHz bandwidth.
ENVIRONMENTAL
Operating temperature: 0° C to 50° C derate output po wer at 2.5% per degree from 50° to 70° C. Storage...
