CMXE200D3 Datasheet | Crydom

Description Operating Voltage [VDC] Maximum Off-State Leakage Current @ Rated Voltage [μAdc] Maximum Load Current [Arms] Minimum Load Current [m Arms] Maximum On-State Resistence [Ohm] (2) Maximum Surge Current (10msec) [Apk] Maximum On-State Voltage Drop @ Rated Current [VDC] 3A CMX200D3 CMXE200D3 0-200 100 3 2 0.20 30 0.6 5A CMX60D5 CMXE60D5 0-60 100 5 2 .10 60 0.5 6A CMX100D6 CMXE100D6 10 A CMX60D10 CMXE60D10 10 A CMX100D10 CMXE100D10 20 A CMX60D20 CMXE60D20 0-100 100 6 2 .040 100 0.24 0-60 100(6) 10 2 .018 100 0.18 0-100 100 10 2 .010 100 0.1 0-60 100 20 2 .0033 200 0.1 INPUT SPECIFICATIONS (1) Description Control Voltage Range Maximum Turn On Voltage Minimum Turn-Off Voltage Typical Input Current Nominal Input Impedance Maximum Turn-On Time [msec] Maximum Turn-Off Time [μsec] GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output (50/60Hz) (3) Minimum Insulation Resistance (@ 500 VDC) (3) Maximum Capacitance, Input/Output Ambient Operating Temperature Range (4) Ambient Storage Temperature Range (4) Weight (typical) Encapsulation Enclosure and PCB 3.0-10.0 VDC 3.0 VDC 1 .0 VDC 15 m Adc @ 5 VDC 300 Ohm 1.0 300 CMXE 20-28 VDC 20 VDC 1 .0 VDC 12 m Adc @ 24 VDC 780 Ohm 1.0 300 Parameters 2500 Vrms 109 Ohms 15 p F -30ºC to 80ºC -30ºC to 125ºC 0.4 oz. (11g) Thermally Conductive Epoxy Meet the requirements of IEC60335-1 Meets the requirements of solderability per IEC60068-2-20, section 4, method 2 at 5 Seconds GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) @ rated current (RDS-ON) 3) Dielectric and insulation resistance are measured between input and output 4) Low temperature range is limited to -10°C in 20Amps models 5) Inductive loads should be diode suppressed 6) At 55 Vdc 7) Terminals are not suitable for bending or forming process. Do not forget to visit us at: .crydom. Copyright © 2020 Crydom Inc. Specifications subject to change without...