GNA5
GNA5 is Panel Mount manufactured by Crydom.
Description
Operating Voltage (47-63Hz) [Vrms] Transient Voltage [Vdc] (2) Maximum Off-State Leakage Current @ Rated Voltage [m Arms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] Maximum Load Current [Arms] (3) Minimum Load Current [m Arms] Maximum 1 Cycle Surge Current (50/60Hz) [Apk] 1 Second surge current (Apk. Ta=25°C) 50/60 Hz Maximum On-State Voltage Drop @ Rated Current [Vpk] Thermal Resistance Junction to Case (Rjc) [°C/W] Maximum 1/2 Cycle I² t for Fusing (50/60Hz) [A² sec] Minimum Heat Sink for Rated Current @ 40°C [°C/W]
10 A
24-280 600 0.1 500 10 100
90/100
30 1.5 2.2 41/42 3
25 A
24-280 600 0.1 500 25 100
239/250
75 1.3 0.8 285/259 1.5
Do not forget to visit us at: .crydom.
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.
INPUT SPECIFICATIONS (1)
Description
Control Voltage Range Maximum Reverse Voltage Minimum Turn-On Voltage Must Turn-Off Voltage Minimum Input Current (for on-state) Maximum Input Current [m A] Nominal Input Impedance [Ohms] Maximum Turn-On Time [msec] Maximum Turn-Off Time [msec]
GENERAL SPECIFICATIONS (1)
Description
Dielectric Strength, Input to Output (50/60Hz) Dielectric Strength, Input/Output to Ground (50/60Hz) Minimum Insulation Resistance (@ 500 VDC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range (7) Ambient Storage Temperature Range Weight (typical) Housing Material Baseplate Material Input Terminal Screw Torque Range (in-lb/Nm) Load Terminal Screw Torque Range (in-lb/Nm) SSR Mounting Screw Torque Range (in-lb/Nm) Humidity per IEC60068-2-78 LED Input Status Indicator MTBF (Mean Time Between Failures) at 40°C ambient temperature (8) MTBF (Mean Time Between Failures) at 60°C ambient temperature (8)
Datas Pahnele Meoutnt
DC Control
3-32 VDC (4) -32 VDC 3 VDC 1 VDC 9.5 m A 14m A
1/2 Cycle (6) 1/2 Cycle
Current Limited
AC Control
90-280 VAC (5)
- 90 VAC 10 VAC 5 m A 8.5 m A
20...
