RL1632L Datasheet Text
DOCUMENT：RLYL0000 CYNTEC CO., LTD. REVISION ：A4 m o 乾坤科技股份有限公司 PAGE ： 1 OF 7 .c U 1. Scope 4 tapplies to 1.6mm x 3.2mm size 1/2W, fixed metal film chip This specification e e type for use in electronic equipment. h resistors rectangular S a 2. Type Designation at RL1632 L
- -
- -
- -
- .D w (1) (2) (3) (4) w w Where (1) Series No.
(2) L = L Type (3) Resistance value : For example
- R050 = 50mΩ R100 = 100mΩ The “ R “ shall be used as a decimal point. (4) Resistance value : F = ± 1% J = ± 5% 3. Type Designation
L
R050 w w w
.D t a
S a e h
L W a t t e
U 4
.c m o
Code Letter
Dimensions (mm) RL1632L 3.2 ± 0.20 1.6 ± 0.20 1.0 ± 0.15 0.5 ± 0.15
Figure 1. Construction and Dimensions w w w
.D at h S a t e e
4U
. m o c
CYNTEC CO., LTD. 乾坤科技股份有限公司
DOCUMENT：RLYL0000 REVISION ：A4 PAGE ： 2 OF 7
4. Ratings 4.1 Specification Power Ratings
- 1/2 W 0.010Ω〜0.5Ω Resistance Value ± 1% ( F ) 、± 5% ( J ) Resistance Tolerance Note
- : Power ratings is based on continuous full load operation at rated ambient temperature of 70℃. For resistors operated at ambient temperature in excess of 70℃, the maximum load shall be derated in accordance with the following curve.
4.2 Maximum over current
I = 〈32 × R〉 [A] 10ms
Where
I : maximum current R : Nominal resistance value (Ω) Interval 60 seconds minimum
If maximum current so obtained exceed than 32A , use 32A as maximum current. 4.3 Operation Temperature -55℃ to +125℃...