CY7C68301C
CY7C68301C is USB 2.0 to ATA/ATAPI Bridge manufactured by Cypress.
- Part of the CY7C68300C comparator family.
- Part of the CY7C68300C comparator family.
CY7C68300C/CY7C68301C CY7C68320C/CY7C68321C
EZ-USB AT2LP™ USB 2.0 to ATA/ATAPI Bridge
EZ-USB AT2LP™ USB 2.0 to ATA/ATAPI Bridge
Features
- Fixed Function Mass Storage Device
- Requires no Firmware
- Two Power Modes: Self Powered and USB Bus Powered to enable Bus Powered CF (pact Flash) Readers and Truly Portable USB Hard Drives
- Certified pliant for USB 2.0 (TID# 40490119), the USB Mass Storage Class, and the USB Mass Storage Class Bulk-Only Transport (BOT) Specification
- Operates at High-Speed (480 Mbps) or Full-Speed (12 Mbps) USB
- plies with ATA/ATAPI-6 Specification
- Supports 48-bit Addressing for Large Hard Drives
- Supports ATA Security Features
- Supports any ATA mand with the ATACB Function
- Supports Mode for BIOS Boot Support
- Supports ATAPI Serial Number VPD Page Retrieval for Digital Rights Management (DRM) patibility
- Supports PIO Modes 0, 3, and 4, Multiword DMA Mode 2, and UDMA Modes 2, 3, and 4
- Uses One Small External Serial EEPROM for Storage of USB Descriptors and Device Configuration Data
- ATA Interface IRQ Signal Support
- Supports one or two ATA/ATAPI Devices
- Supports pact Flash and one ATA/ATAPI Device
- Supports Board-level Manufacturing Test using the USB I/F
- Places the ATA Interface in High Impedance (High Z) to enable
Sharing of the ATA Bus with another Controller such as an IEEE-1394 to ATA Bridge Chip or MP3 Decoder)
- Low Power 3.3 V Operation
- Fully patible with Native USB Mass Storage Class Drivers
- Cypress Mass Storage Class Drivers available for Windows® (98SE, ME, 2000, XP) and Mac OS X operating systems
Features
(CY7C68320C/CY7C68321C only)
- Supports HID Interface or Custom GPIOs to enable Features such as Single Button Backup, Power Off, and LED-based Notification
- 56-pin QFN and 100-pin TQFP Pb-free...
