CY7C9689A Datasheet | Cypress

TAXI™-patible HOTLink® Transceiver TAXI™-patible HOTLink® Transceiver Features - Second-generation HOTLink® technology - AMD™ AM7968/7969 TAXIchip™-patible - 8-bit 4B/5B or 10-bit 5B/6B NRZI encoded data transport - 10-bit or 12-bit NRZI pre-encoded (bypass) data transport - Synchronous TTL parallel interface - Embedded/bypassable 256-character Transmit and Receive FIFOs - 50- to 200-MBaud serial signaling rate - Internal phase-locked loops (PLLs) with no external PLL ponents - Dual differential PECL-patible serial inputs and outputs - patible with fiber-optic modules and copper cables - Built-in self-test (BIST) for link testing - Link Quality Indicator - Single +5.0 V ±10%supply - 100-pin TQFP - Pb-free package option available Functional Description The CY7C9689A HOTLink Transceiver is a point-to-point munications building block allowing the transfer of data over high-speed serial links (optical fiber, balanced, and unbalanced copper transmission lines) at speeds ranging between 50 and 200 MBaud. The transmit section accepts parallel data of selectable widths and converts it to serial data, while the receiver section accepts serial data and converts it to parallel data of selectable widths. Figure 1 illustrates typical connections between two independent host systems and corresponding CY7C9689A parts. The CY7C9689A provides enhanced technology, increased functionality, a higher level of integration, higher data rates, and lower power dissipation over the AMD AM7968/7969 TAXIchip products. The transmit section of the CY7C9689A HOTLink can be configured to accept either 8- or 10-bit data characters on each clock cycle, and stores the parallel data into an internal synchronous Transmit FIFO. Data is read from the Transmit FIFO and is encoded using embedded 4B/5B or 5B/6B encoders to improve its serial transmission characteristics. These encoded characters are then serialized, converted to NRZI, and output from two PECL-patible...