• Part: CY8C26443
  • Description: Configurable Mixed-Signal Array with On-board Controller
  • Manufacturer: Cypress
  • Size: 1.20 MB
Download CY8C26443 Datasheet PDF
Cypress
CY8C26443
CY8C26443 is Configurable Mixed-Signal Array with On-board Controller manufactured by Cypress.
Configurable Mixed-Signal Array with On-board Controller CY8C25122, CY8C26233, CY8C26443, CY8C26643 Device Data Sheet for Silicon Revision D Programmable System-on-Chip (PSo C™) CYPRESS MICROSYSTEMS August 18, 2003 Document #: 38-12010 CY Rev. - B CMS Rev. 3.22 Cypress Micro Systems CY8C25122/CY8C26233/CY8C26443/CY8C26643 Family Data Sheet CYPRESS MICROSYSTEMS Getting Started in the PSo C World! The award winning PSo C Designer software and PSo C silicon are an integrated unit. The quickest path to understanding the PSo C silicon is through the PSo C Designer software GUI. This data sheet is useful for understanding the details of the PSOC integrated circuit, but is not a good starting point for a new PSo C developer seeking to get a general overview of this new technology. PSo C developers are NOT required to build their own ADCs, DACs, and other peripherals. Embedded in the PSo C Designer software are the individual data sheets, performance graphs, and PSo C User Modules (graphically selected code packets) for the peripherals, such as the incremental ADCs, DACs, LCD controllers, op amps, low-pass filters, etc. With simple GUI-based selection, placement, and connection, the basic architecture of a design may be developed within PSo C Designer software without ever writing a single line of code. Development Kits are available from the following distributors: Digi-Key, Avnet, Arrow, and Future. The Cypress. http://.onfulfillment./cypressstore/ Online Store also contains development kits, C pilers, and all accessories for PSo C development. PSo C "Tele-training" is available for beginners every Friday at 10 am Pacific Time taught by a live marketing or application engineer over the phone. Please see http://.cypress./ under Support >> Tele-Training for more details. Five training classes are available to accelerate the learning curve including introduction, designing, debugging, advanced design, advanced analog, as well as application-specific classes...