Datasheet4U Logo Datasheet4U.com

CYPD1120 - USB Power Delivery Alternate Mode Controller

General Description

CPD1120 device belongs to Cypress’s CCG1 product family which provides a complete USB Type-C and USB Power Delivery port control solution.

Key Features

  • Two configurable 16-bit TCPWM blocks.
  • One I2C master or slave Type-C Support.
  • Integrated transceiver (BB PHY) PD Support.
  • Supports VESA DisplayPort Alternate Mode on USB Type-C Standard Version 1.0 32-bit MCU Subsystem.
  • 48-MHz ARM Cortex-M0 CPU with 32-KB flash and 4-KB SRAM Integrated analog blocks.
  • 12-bit, 1-Msps ADC for VBUS voltage and current monitoring Low-power operation.
  • 1.8-V to 5.5-V operation.
  • Sleep 1.3 mA, Deep Sleep 1.3 uA Packages.
  • 4.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CYPD2803 CMG2 USB Type-C EMCA controller Infineon
CYPD3171 CCG3PA Consumer USB Type-C port controller Infineon
CYPD3174 CCG3PA Consumer USB Type-C port controller Infineon
CYPD3175 CCG3PA Consumer USB Type-C port controller Infineon
CYPD6129 CCG6_CFP USB-C Power Delivery (PD) controller Infineon

Other Datasheets by Cypress (now Infineon)

Part Number Description
CYPD1121 USB Type-C Port Controller
CYPD1122 USB Type-C Port Controller
CYPD1103 USB Type-C Port Controller
CYPD1104-35FNXIT USB Type-C Port Controller
CYPD1105-35FNXIT USB Type-C Port Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PRELIMINARY CYPD1120 Datasheet USB Power Delivery Alternate Mode Controller on Type-C General Description CPD1120 device belongs to Cypress’s CCG1 product family which provides a complete USB Type-C and USB Power Delivery port control solution. The scalable and reconfigurable core architecture of CCG1 enables a base Type-C solution that can scale to a complete 100-W USB Power Delivery with Alternate Mode mux support. CCG1 is also a Type-C cable ID IC for active and passive cables. The ARM® Cortex®-M0 CPU based core can use common open source firmware or custom solutions developed with common libraries and APIs. CCG1 is the CC controller that detects connector insert, plug orientation, and VCONN switching signals.