Datasheet4U Logo Datasheet4U.com

CYW15G0201DXB - Dual-channel HOTLink Transceiver

General Description

The CYP(V)15G0201DXB[1] Dual-channel HOTLink II™ Transceiver is a point-to-point or point-to-multipoint communications building block allowing the transfer of data over high-speed serial links (optical fiber, balanced, and unbalanced copper transmission lines) at signaling speeds ranging from 195- t

Key Features

  • Second-generation HOTLink® technology.
  • Compliant to multiple standards.
  • ESCON, DVB-ASI, Fibre Channel and Gigabit Ethernet (IEEE802.3z).
  • CPRI™ compliant.
  • CYW15G0201DXB compliant to OBSAI-RP3 www. DataSheet4U. com.
  • Internal DC-restoration.
  • Dual differential PECL-compatible serial outputs per channel.
  • Source matched for 50Ω transmission lines.
  • No external bias resistors required.
  • Signaling-rate controlled edg.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CYW20706 single-chip Bluetooth 5.4 LE SoC INFINEON
CYW20707 Bluetooth SoC Cypress
CYW20719 Bluetooth processor Infineon
CYW20736 Bluetooth Low Energy System-on-chip Infineon
CYW20822-P4EPI040 Bluetooth Low Energy module Infineon

Other Datasheets by Cypress (now Infineon)

Part Number Description
CYW15G0101DXB Single-channel HOTLink Transceiver
CYW15G0401DXB Transceiver
CYW15G0403DXB Transceiver
CYW20702 Single-Chip Bluetooth Transceiver and Baseband Processor
CYW20704 Single-Chip Bluetooth Transceiver and Baseband Processor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CYP15G0201DXB CYV15G0201DXB CYW15G0201DXB Dual-channel HOTLink II™ Transceiver Features • Second-generation HOTLink® technology • Compliant to multiple standards — ESCON, DVB-ASI, Fibre Channel and Gigabit Ethernet (IEEE802.3z) — CPRI™ compliant — CYW15G0201DXB compliant to OBSAI-RP3 www.DataSheet4U.com — Internal DC-restoration • Dual differential PECL-compatible serial outputs per channel — Source matched for 50Ω transmission lines — No external bias resistors required — Signaling-rate controlled edge-rates • Compatible with — Fiber-optic modules — Copper cables — Circuit board traces • JTAG boundary scan • Built-In Self-Test (BIST) for at-speed link testing • Per-channel Link Quality Indicator — Analog signal detect • • • • • — Digital signal detect Low power 1.8W @ 3.