CYW20736S Datasheet | Cypress

Bluetooth Low Energy System-in-Package (Si P) Module The CYW20736S is a pact, highly integrated Bluetooth Low Energy (BLE) system-in-package (Si P) module. The CYW20736S Si P includes an embedded BLE antenna, 24 MHz clock, and 512 Kb EEPROM, so only a minimal set of external ponents is needed to create a standalone BLE device. The CYW20736S is designed to accelerate time to market. The Bluetooth stack and several application profiles are built into the module, allowing customers to focus on their core applications. To further reduce application development time, the CYW20736S includes integrated software support, with one-click installation of the plete environment and a one-click pile/build/link/load cycle. All this, coupled with an ultrasmall form factor and support for a wide voltage range, makes the CYW20736S well suited for virtually any Bluetooth Smart application. Cypress Part Numbering Scheme Cypress is converting the acquired Io T part numbers from Broad to the Cypress part numbering scheme. Due to this conversion, there is no change in form, fit, or function as a result of offering the device with Cypress part number marking. The table provides Cypress ordering part number that matches an existing Io T part number. Table 1. Mapping Table for Part Number between Broad and Cypress Broad Part Number BCM20736S Cypress Part Number Features Applications - ARM Cortex-M3 microcontroller unit (MCU) - Embedded 512 Kb EEPROM - Broad Serial Control (BSC), SPI, and UART interfaces - FCC and CE pliant - Ro HS pliant, certified lead- and halogen-free - Moisture Sensitivity Level (MSL) 3 pliant - 6.5 mm × 6.5 mm × 1.2 mm Land Grid Array (LGA) 48-pin package The following profiles are supported in CYW20736S ROM: - Battery status - Blood pressure monitor - Find me - Heart rate monitor - Proximity - Thermometer - Weight scale - Time - Blood glucose monitor Additional profiles that can be supported in CYW20736S RAM...