Datasheet4U Logo Datasheet4U.com

CYW4343W - Single-Chip 802.11 b/g/n MAC/Baseband/Radio

Key Features

  • IEEE 802.11x Key Features.
  • Single-band 2.4 GHz IEEE 802.11b/g/n.
  • Support for 2.4 GHz TurboQAM® data rates (256-QAM) and 20 MHz channel bandwidth.
  • Integrated iTR switch supports a single 2.4 GHz antenna shared between WLAN and Bluetooth.
  • Supports explicit IEEE 802.11n transmit beamforming.
  • Tx and Rx Low-density Parity Check (LDPC) support for improved range and power efficiency.
  • Supports standard SDIO v2.0 and gSPI[1] host interfaces.
  • Supports Space-Time B.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CYW43022 Wi-Fi & Bluetooth combo Infineon
CYW43353 Single-Chip 5G MAC/Baseband/Radio Cypress
CYW20706 single-chip Bluetooth 5.4 LE SoC INFINEON
CYW20707 Bluetooth SoC Cypress
CYW20719 Bluetooth processor Infineon

Other Datasheets by Cypress (now Infineon)

Part Number Description
CYW43438 Single-Chip IEEE 802.11ac b/g/n MAC/Baseband/Radio
CYW43439 Single-Chip IEEE 802.11 b/g/n MAC/Baseband/Radio
CYW43455 Single-Chip 5G WiFi IEEE 802.11n/ac MAC/Baseband/Radio
CYW43012 Ultra-Low Power IEEE 802.11n 802.11ac-friendly MAC/Baseband/Radio
CYW43143 Single Chip IEEE 802.11 b/g/n MAC/PHY/Radio

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CYW4343W Single-Chip 802.11 b/g/n MAC/Baseband/Radio with Bluetooth 4.1 CYW4343W Single-Chip 802.11 b/g/n MAC/Baseband/Radio with Bluetooth 4.1 The Cypress CYW4343W is a highly integrated single-chip solution and offers the lowest RBOM in the industry for wearables, Internet of Things (IoT) gateways, home automation, and a wide range of other portable devices. The chip includes a 2.4 GHz WLAN IEEE 802.11 b/g/n MAC/baseband/radio and Bluetooth 4.1 support. In addition, it integrates a power amplifier (PA) that meets the output power requirements of most handheld systems, a low-noise amplifier (LNA) for best-in-class receiver sensitivity, and an internal transmit/receive (iTR) RF switch, further reducing the overall solution cost and printed circuit board area.